It is currently Sun May 26, 2019 1:27 pm


All times are UTC




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: How to test Load Balancing in EIGRP?
PostPosted: Fri Apr 15, 2011 1:44 am 
Offline

Joined: Tue Feb 08, 2011 3:47 am
Posts: 7
Hi

In my topology both routes are installed to a particular destination. I have achieved this with the help of variance. The problem is that when I am tried to ping interface R5( f1/0 ) i.e. 5.4.6.5/8 it is going through one path only.
I tried with the below command and got the attached response at R1 and when I am checking on interface s0/0 on R3 and R6 with sh int s0/0 command the response was the same as I have attached in the attachment while the ping was in progress.

R1# ping 5.4.6.5 size 8000 repeat 500

Kindly let me know if the load balancing can actually be tested in GNS3 without using no ip cef command or any other command needs to be entered to get this working.

Regards
Rajat




Attachments:
File comment: EIGRP LAB
EIGRP LAB.JPG
EIGRP LAB.JPG [ 34.47 KiB | Viewed 3053 times ]
File comment: interface status of R6 s0/0 while ping is in progress
R6 Console int serial 0.JPG
R6 Console int serial 0.JPG [ 93.58 KiB | Viewed 3045 times ]
File comment: interface status of R3 s0/0 while ping is in progress
R3 Console int serial 0.JPG
R3 Console int serial 0.JPG [ 84.45 KiB | Viewed 3042 times ]
File comment: Ping response at R1 while trying to ping 5.4.6.5
R1 console ping response.JPG
R1 console ping response.JPG [ 179.37 KiB | Viewed 3041 times ]
File comment: This picture displays the eigrp routes installed in R1.
Pls check for 5.0.0.0/8 only

R1 console.JPG
R1 console.JPG [ 54.85 KiB | Viewed 3042 times ]
Top
 Profile  
 
 Post subject: Re: How to test Load Balancing in EIGRP?
PostPosted: Tue Aug 09, 2011 5:02 pm 
Offline

Joined: Wed Apr 21, 2010 12:19 pm
Posts: 13
have you try to use traceroute?


Top
 Profile  
 
 Post subject: Re: How to test Load Balancing in EIGRP?
PostPosted: Sun Sep 04, 2011 3:27 am 
What you need to do is:

1. Disable CEF
2. Enable per-packet load-sharing on the interfaces by applying "ip load-sharing per-packet"




Top
  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group

phpBB SEO