It is currently Tue Sep 29, 2020 11:21 pm


All times are UTC




Post new topic Reply to topic  [ 18 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: configure GNS3 ASA on windows7 .
PostPosted: Sun Jul 18, 2010 1:39 am 
I got the files.




Top
  
 
 Post subject: Re: configure GNS3 ASA on windows7 .
PostPosted: Sun Feb 06, 2011 3:18 pm 
This is really useful info..Thnx Lot


Top
  
 
 Post subject: Re: configure GNS3 ASA on windows7 .
PostPosted: Wed Mar 02, 2011 11:20 pm 
Wooow.. After a long struggle i found this post... Really great stuff. Useful for me....
There is no words to thank...


Top
  
 
 Post subject: Re: configure GNS3 ASA on windows7 .
PostPosted: Sat Mar 05, 2011 7:17 pm 
hi.
forgive me if i post this problem here.
i have a gns3 and add an ASA and a Router.i configured the asa form here(but not the asdm).but i can't ip addressing the asa's ethernet interfaces in fact there is no command such as ip address [ip address] [subnetmask]...... .what can i do for ip address interfaces?
thanks so much


Top
  
 
 Post subject: Re: configure GNS3 ASA on windows7 .
PostPosted: Wed Jul 20, 2011 8:14 am 
For those having issues running ASA in Windows 7. Here it is the solution. S

1. Download “ASA IOS.RAR” from 4share.com
http://search.4shared.com/q/1/ASA%20IOS.rar
2. extract two files: asa802-k8.initrd.gz and sa802-k8.kernel. do not further extract or modify these files.
3. In GNS3(v0.7.4)->QEUM–>ASA SPECIFIC SETTINGS point to the above files. use all other default settings.
4. In QUEM General Settings->IP/HOST BINDING and EXTERNAL QUEMWRAPPER change “localhost” to 127.0.0.1


Top
  
 
 Post subject: Re: configure GNS3 ASA on windows7 .
PostPosted: Tue Aug 23, 2011 8:43 am 
Offline

Joined: Thu May 26, 2011 11:59 am
Posts: 2
I found the solution here:
http://go-to-easyit.blogspot.com/2011/0 ... ows-7.html
http://go-to-easyit.blogspot.com/2011/0 ... -gns3.html

There in Russian, but you can understand by the pictures :)


Top
 Profile  
 
 Post subject: Re: configure GNS3 ASA on windows7 .
PostPosted: Fri Oct 14, 2011 10:39 pm 
Offline

Joined: Sun Aug 22, 2010 10:07 pm
Posts: 44
@ vitasbushiwo - Hello I went to the page you have posted but it's in chinese text and I am unable to translate it.

Do you have another site I can go to???

Thanks

Alim


Top
 Profile  
 
 Post subject: Re: configure GNS3 ASA on windows7 .
PostPosted: Wed Jun 13, 2012 4:39 am 
Offline

Joined: Wed Jun 13, 2012 4:20 am
Posts: 2
vitasbushiwo wrote:
Hello everyone,
How to use the function of the GNS3 ASA under the windows7 is quite difficult. But the problem is solved after lots of work being done. I have searched for plentiful information about it and proposed several solutions.
First, the following information should be noticed:
1. The running of ASA is not available under win7.
2. Telnet of GNS3 doesn’t work when using ASA.
3. The interface can't be loaded when ASA initializing.

1. Please install GNS3 version 0.7
2. Select the "Edit"---"Preferences"---"Qemu"---General Settings". Next set the general configuration parameters, the “default qemu.exe” and “qemu-img.exe” works well. Then select the TEST button.
3. Select ASA options. ASA parameters are configured.
NIC: I use the i82559er. If ASA doesn’t work after the completion of configuration, you can try another one of NIC options. Qemu Options: if the default parameters work well, any change is needed.
Initrd path : this method is seldom used. We could execute the following commands to ensure ASA to load the correct interface:
modprobe e1000
ifconfig eth0 up
ifconfig eth1 up
ifconfig eth2 up
ifconfig eth3 up
ifconfig eth3 up
ifconfig eth4 up
ifconfig eth5 up
/asa/bin na_monitor
I have compiled these commands into asa802-ronsun.gz. You can compile them to your own choice.
kernel cmd line :auto console=ttyS0,9600 bigphysarea=16384 ide1=noprobe (default parameters works fine).
Then the RS CCIE is completed. It’s intriguing and I really miss that time! Security CCIE is waiting for me.

------------ Zheng zheng
you can download the tutorial and the files from: http://bbs.51cto.com/thread-684364-1.html
NOTE:you must have a username to download these files.now,i will tell you how to download these files from this site.let's begin:
first: enter this page : http://bbs.51cto.com/thread-684364-1.html
and find the "新用户注册" button on the upper.Look for it and click .you will see a new page ,this page is about the user's register information.now,let's register it!
2:input user information.for example:
"用户名" username
"邮箱" email.your must enter the correct address
"密码" password.
"确认密码" passowrd
"关注领域" this is field.click and select one.for example:i like network.so i choose the "网络管理" ,choose one and click "确定"button.
"所属行业" choose one ,for example : choose "互联网信息技术" and then click "确定" button.

"职位" this is you position.choose one , for example : i'm a network Engineer so select "网络工程师" is good .and then click "确定"button.
"公司规模" how many people working in your company.select one.
"验证码" authcode.you will see them on the right.
OK! if you enter the correct information ,you can click the ”提交“
button. enter your E-mail.click the link to activate.

enter http://bbs.51cto.com/thread-684364-1.html again. click "回复".
input your username and passwd.click "会员登录".then input the title"标题".and Content(give me the message) .and click "发表回复".
OK,you can find the files and download them.

[email protected]



I went to the web site but there are 7 files. Whihc one is the correct one whihc will work. I still get the same error messgae -
the screen shot are here -

can some body help me here.




Attachments:
print-1.JPG
print-1.JPG [ 85.28 KiB | Viewed 8012 times ]
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 18 posts ]  Go to page Previous  1, 2

All times are UTC


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

phpBB SEO