It is currently Mon Jul 06, 2020 1:27 pm

All times are UTC

Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: How can I know if PIX (PEMU) has passed activation key
PostPosted: Mon May 18, 2009 4:08 pm 
Hi all,

How can I know if PIX (PEMU) has passed activation key?

Below are the logs shown on my PIX.

pixfirewall# activation-key << hidden >>
The requested key is the SAME as the flash activation key.
The flash activation key will not be modified.
The following features available in running activation key are NOT
available in new activation key:
Failover is different.
running activation key: Restricted(R)
new activation key: Unrestricted(UR)
WARNING: The running activation key was not updated with the requested key.
The flash activation key was updated with the requested key, and will
become active after the next reload.
pixfirewall# wr
Building configuration...
Cryptochecksum: cba8968c ab6c1690 57f58144 165abb8f

1226 bytes copied in 1.200 secs (1226 bytes/sec)


pixfirewall# sh ver

Cisco PIX Security Appliance Software Version 7.2(3)

Compiled on Wed 15-Aug-07 16:08 by builders
System image file is "Unknown, monitor mode tftp booted image"
Config file at boot was "startup-config"

pixfirewall up 1 min 19 secs

Hardware: PIX-525, 256 MB RAM, CPU Pentium II 1 MHz
Flash E28F128J3 @ 0xfff00000, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB

0: Ext: Ethernet0 : address is 0000.abcd.ef00, irq 9
1: Ext: Ethernet1 : address is 0000.abcd.ef01, irq 11
2: Ext: Ethernet2 : address is 0000.abcd.ef02, irq 11
3: Ext: Ethernet3 : address is 0000.abcd.ef03, irq 11
4: Ext: Ethernet4 : address is 0000.abcd.ef04, irq 11
The Running Activation Key is not valid, using default settings:

Licensed features for this platform:
Maximum Physical Interfaces : 6
Maximum VLANs : 25
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Disabled
VPN-3DES-AES : Disabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 0
GTP/GPRS : Disabled
VPN Peers : Unlimited

This platform has a Restricted (R) license.

Serial Number: << hidden >>
Running Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
Configuration has not been modified since last system restart.

Appreciated if someone can give me some ideas.


Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group