It is currently Thu Dec 12, 2019 7:48 am


All times are UTC




Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: Not able to ping tap0 interface.
PostPosted: Tue Aug 27, 2013 7:00 pm 
Offline

Joined: Sat May 11, 2013 6:12 am
Posts: 4
Dear folks,

Need your support. i am not able to ping tap0 interface from GNS3 router.

Below is the way which i was adopted for TAP0 configuration.

$ ls -l /dev | grep -E 'tun|tap'
crw-rw---- 1 root wheel 34, 0 Aug 26 18:44 tap0
crw-rw---- 1 root wheel 34, 1 Aug 26 18:44 tap1
crw-rw---- 1 root wheel 34, 10 Aug 26 18:44 tap10
crw-rw---- 1 root wheel 34, 11 Aug 26 18:44 tap11
crw-rw---- 1 root wheel 34, 12 Aug 26 18:44 tap12
crw-rw---- 1 root wheel 34, 13 Aug 26 18:44 tap13
crw-rw---- 1 root wheel 34, 14 Aug 26 18:44 tap14
crw-rw---- 1 root wheel 34, 15 Aug 26 18:44 tap15
crw-rw---- 1 root wheel 34, 2 Aug 26 18:44 tap2
crw-rw---- 1 root wheel 34, 3 Aug 26 18:44 tap3
crw-rw---- 1 root wheel 34, 4 Aug 26 18:44 tap4
crw-rw---- 1 root wheel 34, 5 Aug 26 18:44 tap5
crw-rw---- 1 root wheel 34, 6 Aug 26 18:44 tap6
crw-rw---- 1 root wheel 34, 7 Aug 26 18:44 tap7
crw-rw---- 1 root wheel 34, 8 Aug 26 18:44 tap8
crw-rw---- 1 root wheel 34, 9 Aug 26 18:44 tap9
crw-rw---- 1 root wheel 35, 0 Aug 26 18:44 tun0
crw-rw---- 1 root wheel 35, 1 Aug 26 18:44 tun1
crw-rw---- 1 root wheel 35, 10 Aug 26 18:44 tun10
crw-rw---- 1 root wheel 35, 11 Aug 26 18:44 tun11
crw-rw---- 1 root wheel 35, 12 Aug 26 18:44 tun12
crw-rw---- 1 root wheel 35, 13 Aug 26 18:44 tun13
crw-rw---- 1 root wheel 35, 14 Aug 26 18:44 tun14
crw-rw---- 1 root wheel 35, 15 Aug 26 18:44 tun15
crw-rw---- 1 root wheel 35, 2 Aug 26 18:44 tun2
crw-rw---- 1 root wheel 35, 3 Aug 26 18:44 tun3
crw-rw---- 1 root wheel 35, 4 Aug 26 18:44 tun4
crw-rw---- 1 root wheel 35, 5 Aug 26 18:44 tun5
crw-rw---- 1 root wheel 35, 6 Aug 26 18:44 tun6
crw-rw---- 1 root wheel 35, 7 Aug 26 18:44 tun7
crw-rw---- 1 root wheel 35, 8 Aug 26 18:44 tun8
crw-rw---- 1 root wheel 35, 9 Aug 26 18:44 tun9
$ sudo chown root /Applications/GNS3.app/Contents/Resources/dynamips*.bin
$ sudo chmod 4755 /Applications/GNS3.app/Contents/Resources/dynamips*.bin
$ ls -l /Applications/GNS3.app/Contents/Resources/dynamips*.bin
[email protected] 1 root admin 980552 Jul 5 23:43 /Applications/GNS3.app/Contents/Resources/dynamips-0.2.8-RC3-community-OSX.intel64.bin
[email protected] 1 root admin 1057220 Jul 5 23:43 /Applications/GNS3.app/Contents/Resources/dynamips-0.2.8-community-OSX.intel64.bin
$ ifconfig tap0
tap0: flags=8842<BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether a2:34:91:c4:f2:b1
open (pid 1529)
$ sudo ifconfig tap0 inet 192.168.2.222/24
$ ifconfig tap0
tap0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether a2:34:91:c4:f2:b1
inet 192.168.2.222 netmask 0xffffff00 broadcast 192.168.2.255
open (pid 1529)
$ ping -c 3 192.168.2.200
PING 192.168.2.200 (192.168.2.200): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1

--- 192.168.2.200 ping statistics ---
3 packets transmitted, 0 packets received, 100.0% packet loss

Configuration on R1.

interface FastEthernet0/0
ip address 192.168.2.200 255.255.255.0
duplex auto
speed auto

R1#show ip interface brief
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 192.168.2.200 YES manual up up
FastEthernet0/1 unassigned YES unset administratively down down
R1#




Attachments:
Tap0 Testing.png
Tap0 Testing.png [ 15.59 KiB | Viewed 2839 times ]
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group

phpBB SEO