It is currently Sun Aug 25, 2019 7:04 am

View unanswered posts | View active topics


Board index » GNS3 » HOWTOs

All times are UTC




Post new topic Reply to topic  Page 4 of 5
  [ 45 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next
  Print view Previous topic | Next topic 
Author Message
ethibault
 Post subject: Re: GNS3 Launchpad Instructions. Or HOW TO DOWNLOAD .deb pgk
PostPosted: Sun Mar 16, 2014 2:48 pm 
Offline

Joined: Sun Mar 16, 2014 2:37 pm
Posts: 8
Hello I have tried to install the PPA on a pendrive linux USB running Ubuntu 12.04
I've had these messages :

"the following packages include unsatisfied dependencies :

gns3 : Depends: xdotool but it is not installable
recommends wireshark but not installable

impossible to correct problems, defectuous packages are in mode "keep as is"

"
May be this is meant to be installed with latest ubuntu version, though in the introduction your refered to 12.04

I think wireshark should not be an issue but that xdotool I think is required in your PPA no ?
Top
 Profile  
 
claydon_dan
 Post subject: Re: GNS3 Launchpad Instructions. Or HOW TO DOWNLOAD .deb pgk
PostPosted: Sun Mar 16, 2014 9:35 pm 
Offline

Joined: Sun Sep 16, 2012 9:55 pm
Posts: 541
Location: England
The package xdotool should be available from the main ubuntu repository. It's possible being a USB boot, that apt sources list (/etc/apt/sources.list) is different from normal.

As seen here: http://packages.ubuntu.com/search?keywords=xdotool, xdotool is available in every Ubuntu release... including 12.04

_________________
Daniel
Forum Moderator & Debian Package Maintainer for GNS3, Dynamips & VPCS.
Standalone DEB Packages are available from http://gns3.serverb.co.uk - To be updated!
Top
 Profile  
 
ethibault
 Post subject: Re: GNS3 Launchpad Instructions. Or HOW TO DOWNLOAD .deb pgk
PostPosted: Sun Mar 16, 2014 11:15 pm 
Offline

Joined: Sun Mar 16, 2014 2:37 pm
Posts: 8
Hello, thanks for the reply
I do not think this is related to the USB drive but rather to the fact that I run ubuntu in French I have seen things that looks as if a translation to FR was searched.

Since last time, I manually added to the source.list :

deb http://ppa.launchpad.net/gns3/ppa/ubuntu precise main

because it was not there ni spite of my typing the command sin your first post.

and I added also :

deb http://fr.archive.ubuntu.com/ubuntu precise main universe

that was quoted as a vlaid miror to get xdotool from the link you gave above.

after that I did :
sudo apt-get update

and then again :
sudo add-apt-repository ppa:gns3/ppa
sudo apt-get update
sudo apt-get install dynamips gns3

the result I get is that :

"
...
Lecture des listes de paquets... Fait
W: Duplicate sources.list entry http://ppa.launchpad.net/gns3/ppa/ubuntu/ precise/main amd64 Packages (/var/lib/apt/lists/ppa.launchpad.net_gns3_ppa_ubuntu_dists_precise_main_binary-amd64_Packages)
W: Duplicate sources.list entry http://ppa.launchpad.net/gns3/ppa/ubuntu/ precise/main i386 Packages (/var/lib/apt/lists/ppa.launchpad.net_gns3_ppa_ubuntu_dists_precise_main_binary-i386_Packages)
W: Vous pouvez lancer « apt-get update » pour corriger ces problèmes.
[email protected]:~$ "

this is in French, I translate "Fait" is "done"
and the last sentence :
W: You can launch "apt-get-update" to correct these problems"
which I did with no result.

what surpises me is that it seems to be a problem to have amd64 Packages and i386 Packages, I don't understand,
the directory /var/lib/apt/lists is full of those dual definitions ?

with all that I do not even know yet how I should be launching gns3 if ever the installation would succeed
Top
 Profile  
 
claydon_dan
 Post subject: Re: GNS3 Launchpad Instructions. Or HOW TO DOWNLOAD .deb pgk
PostPosted: Mon Mar 17, 2014 10:11 am 
Offline

Joined: Sun Sep 16, 2012 9:55 pm
Posts: 541
Location: England
ethibault wrote:
Since last time, I manually added to the source.list :

deb http://ppa.launchpad.net/gns3/ppa/ubuntu precise main

<SNIP>
...
Lecture des listes de paquets... Fait
W: Duplicate sources.list entry http://ppa.launchpad.net/gns3/ppa/ubuntu/ precise/main amd64 Packages (/var/lib/apt/lists/ppa.launchpad.net_gns3_ppa_ubuntu_dists_precise_main_binary-amd64_Packages)
W: Duplicate sources.list entry http://ppa.launchpad.net/gns3/ppa/ubuntu/ precise/main i386 Packages (/var/lib/apt/lists/ppa.launchpad.net_gns3_ppa_ubuntu_dists_precise_main_binary-i386_Packages)
W: Vous pouvez lancer « apt-get update » pour corriger ces problèmes.
[email protected]:~$ "

What this message is telling you is that you have two entries for the PPA (You'll need to check both /etc/apt/sources.list and /etc/apt/sources.d/*) and remove one of them.

ethibault wrote:
what surpises me is that it seems to be a problem to have amd64 Packages and i386 Packages, I don't understand,
the directory /var/lib/apt/lists is full of those dual definitions?

I don't think this is a problem with having both amd64 and i386, but rather the problem above this.

ethibault wrote:
with all that I do not even know yet how I should be launching gns3 if ever the installation would succeed

Once GNS3 is installed it can be launched from the 'Programs' menu (either search 'GNS3' or it should be located in the 'Education' category

_________________
Daniel
Forum Moderator & Debian Package Maintainer for GNS3, Dynamips & VPCS.
Standalone DEB Packages are available from http://gns3.serverb.co.uk - To be updated!
Top
 Profile  
 
actionmystique
 Post subject: Re: GNS3 Launchpad Instructions. Or HOW TO DOWNLOAD .deb pgk
PostPosted: Sat Mar 22, 2014 10:18 am 
Offline

Joined: Fri Dec 02, 2011 2:12 pm
Posts: 120
Location: Paris
Hey claydon_dan,

I've noticed a new Dynamips release (0.2.11) on Ubuntu 13.10.
Could you post a change log?

_________________
A Collection of GNS3 Labs: https://learningnetwork.cisco.com/message/232820
i7 4700MQ quad-core 2.6 Ghz and 16 GB RAM
CCNA - CCDA
Beta Test Team
GNS3 0.8.6 on Windows 7 64 bits
GNS3 0.8.6 on Ubuntu 13.10 and Qemu 1.5.2
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Top
 Profile  
 
claydon_dan
 Post subject: Re: GNS3 Launchpad Instructions. Or HOW TO DOWNLOAD .deb pgk
PostPosted: Sat Mar 22, 2014 1:43 pm 
Offline

Joined: Sun Sep 16, 2012 9:55 pm
Posts: 541
Location: England
The changelog for Dynamips since 0.2.10 can be seen here: https://github.com/GNS3/dynamips/commit ... 11b1ec300f
The changelog specific to the packaging can be found here: https://launchpad.net/~gns3/+archive/ppa/+packages

_________________
Daniel
Forum Moderator & Debian Package Maintainer for GNS3, Dynamips & VPCS.
Standalone DEB Packages are available from http://gns3.serverb.co.uk - To be updated!
Top
 Profile  
 
rednectar
 Post subject: Re: GNS3 Launchpad Instructions. Or HOW TO DOWNLOAD .deb pgk
PostPosted: Sun Mar 23, 2014 3:36 am 
Offline

Joined: Fri Mar 05, 2010 11:33 am
Posts: 1494
Location: Australia
@Daniel - or anyone else who knows

Do you have instructions on how to compile dynamips on OS X?

And can someone update http://www.gns3.net/dynamips/ with v0.2.11 info please

_________________
RedNectar
http://rednectar.net
@rednectarchris
GNS3 WorkBench-a VMware image of Ubuntu with GNS3 and VPCS installed and a collection of exercises/labs
Top
 Profile  
 
claydon_dan
 Post subject: Re: GNS3 Launchpad Instructions. Or HOW TO DOWNLOAD .deb pgk
PostPosted: Sun Mar 23, 2014 9:57 am 
Offline

Joined: Sun Sep 16, 2012 9:55 pm
Posts: 541
Location: England
rednectar wrote:
Do you have instructions on how to compile dynamips on OS X?

I'm afraid I don't... I would presume it would be similar to compiling on Linux, but couldn't say for certain.

I think Jeremy may well be the one for that...

_________________
Daniel
Forum Moderator & Debian Package Maintainer for GNS3, Dynamips & VPCS.
Standalone DEB Packages are available from http://gns3.serverb.co.uk - To be updated!
Top
 Profile  
 
actionmystique
 Post subject: Re: GNS3 Launchpad Instructions. Or HOW TO DOWNLOAD .deb pgk
PostPosted: Tue Jul 15, 2014 6:43 am 
Offline

Joined: Fri Dec 02, 2011 2:12 pm
Posts: 120
Location: Paris
Heelo claydon_dan,
Are you planning on upgrading the PPA to GNS3 0.8.7?

_________________
A Collection of GNS3 Labs: https://learningnetwork.cisco.com/message/232820
i7 4700MQ quad-core 2.6 Ghz and 16 GB RAM
CCNA - CCDA
Beta Test Team
GNS3 0.8.6 on Windows 7 64 bits
GNS3 0.8.6 on Ubuntu 13.10 and Qemu 1.5.2
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Top
 Profile  
 
claydon_dan
 Post subject: Re: GNS3 Launchpad Instructions. Or HOW TO DOWNLOAD .deb pgk
PostPosted: Tue Jul 15, 2014 6:37 pm 
Offline

Joined: Sun Sep 16, 2012 9:55 pm
Posts: 541
Location: England
Absolutely! I shall try and get these updated shortly (GNS3, Dynamips and VPCS all need updating!)



_________________
Daniel
Forum Moderator & Debian Package Maintainer for GNS3, Dynamips & VPCS.
Standalone DEB Packages are available from http://gns3.serverb.co.uk - To be updated!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 4 of 5
  [ 45 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next

Board index » GNS3 » HOWTOs

All times are UTC


Who is online

Users browsing this forum: No registered users and 0 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

phpBB SEO