It is currently Tue Sep 29, 2020 10:39 pm


All times are UTC




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: How to move configuration IOUs between projects?
PostPosted: Wed Jul 30, 2014 4:22 am 
Offline

Joined: Wed May 21, 2014 5:37 am
Posts: 40
How to move configuration IOUs between projects?
I asked this question and it seems still does not work. Am I right?
Any chance to implement it

Regards
Robert




Top
 Profile  
 
 Post subject: Re: How to move configuration IOUs between projects?
PostPosted: Thu Jul 31, 2014 3:15 am 
Offline
Site Admin

Joined: Sat Oct 11, 2008 1:41 pm
Posts: 2668
Location: Canada
Hi,

The easiest would be to export the configs (File -> Import/Export device configs) and import them in another project. Be careful the devices must have the same names.

_________________
Jeremy, GNS3 Programmer & Benevolent Dictator for Life.


Top
 Profile  
 
 Post subject: Re: How to move configuration IOUs between projects?
PostPosted: Thu Jul 31, 2014 4:30 am 
Offline

Joined: Wed May 21, 2014 5:37 am
Posts: 40
Hi Jeremy for me it does not work.
GNS1 beta1 on Windows 8.1.
What I do:
Add some IOU devices, make some configuration like: ip addresses on interfaces, change hostnames, and more.
Export configuration with success - no error messages.
When I look at what is exported in files, don’t see what was changed - some file have hex numbers only, in some I can see clear text settings)
Erase nvram, import, and as I expected don’t see my configuration in IOU routers and switches
Thank you for your help
Robert


Top
 Profile  
 
 Post subject: Re: How to move configuration IOUs between projects?
PostPosted: Thu Jul 31, 2014 6:22 am 
Offline
Site Admin

Joined: Sat Oct 11, 2008 1:41 pm
Posts: 2668
Location: Canada
Oopps sorry I forgot to indicate that the import/export feature will only work for initial configs in IOU. I think doing the following in each IOU will do the job:

Code:
copy run unix:initial-config.cfg


Then you can export the configs and import them to a new topology with IOU devices not configured.

_________________
Jeremy, GNS3 Programmer & Benevolent Dictator for Life.


Top
 Profile  
 
 Post subject: Re: How to move configuration IOUs between projects?
PostPosted: Thu Jul 31, 2014 6:46 am 
Offline

Joined: Wed May 21, 2014 5:37 am
Posts: 40
Thank you Jeremy, I will test.
Are you going to make more sophisticated method to control export/import on IOUes. Also make me nervous when add new IOU device with the same name what I had previously and see old configuration :(

Thank you
Robert




Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group

phpBB SEO