It is currently Wed Apr 24, 2019 12:43 pm


All times are UTC




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: L3 to L2 port-channel with IOU
PostPosted: Thu Sep 11, 2014 10:08 pm 
Offline

Joined: Sat May 03, 2014 10:53 pm
Posts: 14
Is there anyway to create a port-channel between the L3 IOU and the L2 IOU? I can't make it work. I can't even issue the "switchport" command on the L3 IOU. I want to have L3 IOU's doing my routing and want to have L2 port channels down to my access layer IOU devices (L2). Any ideas? I don't think GNS3 1.0 is ready to replace real gear yet, they need to do A LOT more work on this....




Top
 Profile  
 
 Post subject: Re: L3 to L2 port-channel with IOU
PostPosted: Sat Sep 13, 2014 12:21 pm 
Offline

Joined: Sat May 03, 2014 10:53 pm
Posts: 14
Bump....Anyone?


Top
 Profile  
 
 Post subject: Re: L3 to L2 port-channel with IOU
PostPosted: Sat Sep 13, 2014 7:36 pm 
Offline

Joined: Fri May 13, 2011 10:35 pm
Posts: 83
Location: Seattle, WA (USA)
L2IOU supports most of the routing features also. A basic lab can be created with the following configuration that includes:

- L2 EtherChannel with LACP
- 802.1Q
- EIGRP (Named Mode)

Code:
!! L3IOU (i86bi-linux-l3-adventerprisek9-15.4.1T.bin)
! Set interfaces
int lo0
  ip addr 1.1.1.1 255.255.255.255
  exit
int e1/0
  ip addr 10.0.0.1 255.255.255.0
  no shut
  exit
! Configure dynamic routing
router eigrp gns3
  address-family ipv4 autonomous-system 1
   network 1.1.1.1 0.0.0.0
   network 10.0.0.1 0.0.0.0
   af-interface lo0
    passive-interface
    exit-af-interface
    end

!! L2IOU1 (i86bi-linux-l2-adventerprise-15.1b.bin)
! Create VLAN 100
vlan 100
  exit
! Set interfaces
int lo0
  ip addr 2.2.2.2 255.255.255.255
  exit
int e1/0
  no switchport
  ip addr 10.0.0.2 255.255.255.0
  no shut
  exit
int range e0/0-3
  switchport trunk encap dot1q
  switchport mode trunk
  channel-protocol lacp
  channel-group 1 mode active
  no shut
  exit
int po1
  switchport trunk encap dot1q
  switchport mode trunk
  exit
int vlan100
  ip addr 10.0.100.1 255.255.255.0
  no shut
  exit
! Configure dynamic routing
router eigrp gns3
  address-family ipv4 autonomous-system 1
   network 2.2.2.2 0.0.0.0
   network 10.0.0.2 0.0.0.0
   network 10.0.100.1 0.0.0.0
   af-interface lo0
    passive-interface
    exit-af-interface
   af-interface vlan100
    passive-interface
    exit-af-interface
    end

!! L2IOU2 (i86bi-linux-l2-adventerprise-15.1b.bin)
! Create VLAN 100
vlan 100
  exit
! Set interfaces
int range e0/0-3
  switchport trunk encap dot1q
  switchport mode trunk
  channel-protocol lacp
  channel-group 1 mode active
  no shut
  exit
int po1
  switchport trunk encap dot1q
  switchport mode trunk
  exit
int e1/0
  switchport mode access
  switchport access vlan 100
  no shut
  end

!! VPCS
! Set interface
ip 10.0.100.10 /24 10.0.100.1

save




Attachments:
port-channel-top.png
port-channel-top.png [ 184.86 KiB | Viewed 6375 times ]
end-to-end-test.png
end-to-end-test.png [ 92.97 KiB | Viewed 6375 times ]

_________________
http://binarynature.blogspot.com/search/label/GNS3
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group

phpBB SEO