It is currently Sat Sep 21, 2019 1:21 pm


All times are UTC




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: ASA 8.42 - No ethernet interfaces
PostPosted: Mon Sep 22, 2014 8:11 pm 
Offline

Joined: Mon Sep 22, 2014 1:56 pm
Posts: 2
Guys and Gals,

Not sure what I'm doing wrong. But I am able to the ASA up in GNS3 but there are NO interfaces (Gigabit,Fast Ethernet) for me to configure an IP address on? What am I missing?

THANKS!!!!!!




Top
 Profile  
 
 Post subject: Re: ASA 8.42 - No ethernet interfaces
PostPosted: Tue Sep 30, 2014 8:35 am 
Offline

Joined: Thu Sep 25, 2014 12:19 pm
Posts: 18
Location: Nantes, France
Hi,

Do you have some ethX interfaces in your console during the startup of the ASA ?
Did you configure 1 or more NIC on the ASA Qemu configuration panel ?

Could you "copy and paste" the result of your
    sh int
and a print screen of your ASA configuration (with your GNS3 version) ?

B.R.

_________________
~~~~~~~~~~~~~~
New to GNS3 / working on network design mainly
Running : GNS3 1.0beta3 All-in-One / Wireshark 1.12.1 / VirtualBox 4.3.16 / Widows 8.1 and 10 / T430s 8GB RAM
Sorry for my poor English level


Top
 Profile  
 
 Post subject: Re: ASA 8.42 - No ethernet interfaces
PostPosted: Tue Sep 30, 2014 1:18 pm 
Offline

Joined: Mon Sep 22, 2014 1:56 pm
Posts: 2
Hey thanks for the reply but I got it figured out. Red Nectar shot me a copy of the IOS he was using and it fixed my issue. I think, and this is a maybe, that I was using the IOS verson for a 5510 and the emulator works for a 5520. Not a hundred percent on that but, it's my best guess.


Top
 Profile  
 
 Post subject: Re: ASA 8.42 - No ethernet interfaces
PostPosted: Tue Sep 30, 2014 10:39 pm 
Offline

Joined: Thu Sep 25, 2014 12:19 pm
Posts: 18
Location: Nantes, France
Hi,

That possible, but as far as I know, every Cisco ASA (5505, 5510, 5520, 5540, and 5550, information from http://www.cisco.com) uses the save image (asa842-k8.bin). So, I would suggest that the file might have been corrupted :(.

The most important is that you managed to have it working properly :)

An important point for those looking at this post, the "no interface" problem may also come from using the repack.v4.1.sh script to repack the asa file. The v4.1 script is only for VMWare. For Qemu and VirtualBox, you must use the v4 script, otherwise you have a problem of interfaces and slot0: during startup. But it's only one of the multiple problems which my occurs :s

B.R.

PS : if you're using the GNS3 1 beta 3 and managed to save the configuration, could you share your configuration in that post please : http://forum.gns3.net/topic12182-10.html



_________________
~~~~~~~~~~~~~~
New to GNS3 / working on network design mainly
Running : GNS3 1.0beta3 All-in-One / Wireshark 1.12.1 / VirtualBox 4.3.16 / Widows 8.1 and 10 / T430s 8GB RAM
Sorry for my poor English level


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group

phpBB SEO