It is currently Thu Oct 19, 2017 8:03 pm


All times are UTC




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: I cant telnet,add pcs and internet
PostPosted: Fri Oct 10, 2014 1:38 pm 
Offline

Joined: Tue Aug 19, 2014 9:18 pm
Posts: 2
Hello,
I need assistance of someone very familiar with gns3 to assist me with some issues I am having on gns3;
(1) I don't know how to do telnet in gns3
(2) I want to add pcs to the interfaces of switches on my network to do pings and other config but I am stuck
(3) I need to add internet to my design but I cant .
I will appreciate someone with better understanding of gns3 to kindly put me through.
Cheers




Top
 Profile  
 
 Post subject: Re: I cant telnet,add pcs and internet
PostPosted: Fri Oct 10, 2014 11:58 pm 
Offline

Joined: Sat Oct 04, 2014 8:38 am
Posts: 45
tyboi wrote:
Hello,
I need assistance of someone very familiar with gns3 to assist me with some issues I am having on gns3;
(1) I don't know how to do telnet in gns3
(2) I want to add pcs to the interfaces of switches on my network to do pings and other config but I am stuck
(3) I need to add internet to my design but I cant .
I will appreciate someone with better understanding of gns3 to kindly put me through.
Cheers


That's a lot and is probably beyond the scope of a single post.

Quote:
(1) I don't know how to do telnet in gns3


I'm assuming you're running Windows. Most of this applies to other OSs though.

You can console into a device by right clicking on the device and then right-clicking the console option. The all-in-one install of GNS3 comes with Putty default and will open a CLI to the console port of the device (You can see port by hovering your mouse pointer over the device).

Telnetting from a remote device is a slightly more complex matter. You can telnet from router to router. Otherwise, you need to learn how to setup a virtual pc and add it to your topolog. VMWare Player and VirtualBox are two widely used and free Virtual Machine programs.

Quote:
(2) I want to add pcs to the interfaces of switches on my network to do pings and other config but I am stuck


http://www.gns3.net/documentation/gns3/ ... opologies/

http://www.youtube.com/watch?v=--AhDDHSFpU

Quote:
(3) I need to add internet to my design but I cant .


http://www.gns3.net/documentation/gns3/ ... -networks/

One caveat, this is just 1/2 of how to connect your topo to an external network. You'll have to know to configure NAT on the external facing router as well as how to set default routes.


Top
 Profile  
 
 Post subject: Re: I cant telnet,add pcs and internet
PostPosted: Sat Oct 11, 2014 10:51 am 
Offline

Joined: Fri Mar 05, 2010 11:33 am
Posts: 1494
Location: Australia
You might also get some good tips from the free chapter of my GNS3 Network Simulation Guide (Click on [Free Sample]). Or Amazon


Disclaimer: I am the author of the GNS3 Network Simulation Guide



_________________
RedNectar
http://rednectar.net
@rednectarchris
GNS3 WorkBench-a VMware image of Ubuntu with GNS3 and VPCS installed and a collection of exercises/labs


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group

phpBB SEO