It is currently Mon Dec 11, 2017 1:58 am


All times are UTC




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: C3660 test fail
PostPosted: Sun Oct 12, 2014 8:49 pm 
Offline

Joined: Sun Oct 12, 2014 8:39 pm
Posts: 1
Hello.

When I do the test (test settings button), the test fails. Because of this when I keep the project files are not saved .cfg. This is what the test shows (I use GNS3 0.8.7 with Windows 7):

Thank you very much.


Image

Cisco Router Simulation Platform (version 0.2.12-x86/Windows stable)
Copyright (c) 2005-2011 Christophe Fillot.
Build date: Mar 28 2014 12:41:27

Local UUID: 923d3978-747c-46fb-be72-7c9af7dc511b

Virtual RAM size set to 128 MB.
Idle PC set to 0x0.
IOS image file: D:\Alejandro\Universidad\Curso 2014-2015\Arquitectura Redes\AR-i
mages-cisco\C3660-I-Mz_20121-5_20T8.image

ILT: loaded table "mips64j" from cache.
ILT: loaded table "mips64e" from cache.
ILT: loaded table "ppc32j" from cache.
ILT: loaded table "ppc32e" from cache.
CPU0: carved JIT exec zone of 16 Mb into 512 pages of 32 Kb.
C3600 instance 'default' (id 0):
VM Status : 0
RAM size : 128 Mb
NVRAM size : 128 Kb
Chassis : 3640
IOS image : D:\Alejandro\Universidad\Curso 2014-2015\Arquitectura Redes\AR-im
ages-cisco\C3660-I-Mz_20121-5_20T8.image

cygwin warning:
MS-DOS style path detected: D:\Alejandro\Universidad\Curso 2014-2015\Arquitect
ura Redes\AR-images-cisco\C3660-I-Mz_20121-5_20T8.image
Preferred POSIX equivalent is: /cygdrive/d/Alejandro/Universidad/Curso 2014-20
15/Arquitectura Redes/AR-images-cisco/C3660-I-Mz_20121-5_20T8.image
CYGWIN environment variable option "nodosfilewarning" turns off this warning.
Consult the user's guide for more details about POSIX paths:
http://cygwin.com/cygwin-ug-net/using.h ... -pathnames
Loading ELF file 'D:\Alejandro\Universidad\Curso 2014-2015\Arquitectura Redes\AR
-images-cisco\C3660-I-Mz_20121-5_20T8.image'...
ELF entry point: 0x80008000

C3600 'default': starting simulation (CPU0 PC=0xffffffffbfc00000), JIT enabled.
ROMMON emulation microcode.

Launching IOS image at 0x80008000...

Invalid iomem value in ROM (5). Smart-init will
now run to compute a valid value
iomem percentage may need to be reset manually
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
000000 UNKNOWN port adapter
0X0010A6F8 public buffer pools
0X00211000 public particle pools
TOTAL: 0X0031B6F8

If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 4Mb.
Using 3 percent iomem. [4Mb/128Mb]
GT64120: Device ID error, got 0x4601

Error, bridge 1 not DEC21152, returned 0x0

Error, bridge 2 not DEC21152, returned 0x0

Error, bridge 3 not DEC21152, returned 0x0

Error, bridge 4 not DEC21152, returned 0x0

Error, bridge 5 not DEC21152, returned 0x0

Error, bridge 6 not DEC21152, returned 0x0


Wrong system software for this hardware


ROM: reload requested...
% No memory map for code execution at 0x0
% Unable to create instruction block for vaddr=0x0
insn_page_compile: unable to create JIT block.
VM 'default': unable to compile block for CPU0 PC=0x0
Shutdown in progress...
Shutdown completed.

C:\Users\ALEJAN~1\AppData\Local\Temp>




Top
 Profile  
 
 Post subject: Re: C3660 test fail
PostPosted: Wed Oct 15, 2014 1:41 am 
Offline

Joined: Fri Mar 05, 2010 11:33 am
Posts: 1494
Location: Australia
@varuk,

I think you have a problem with your image.

It worries me that I see
Code:
Cisco Router Simulation Platform (version 0.2.12-x86/Windows stable)
Copyright (c) 2005-2011 Christophe Fillot.
Build date: Mar 28 2014 12:41:27

Local UUID: 923d3978-747c-46fb-be72-7c9af7dc511b

Virtual RAM size set to 128 MB.
Idle PC set to 0x0.
IOS image file: D:\Alejandro\Universidad\Curso 2014-2015\Arquitectura Redes\AR-i
mages-cisco\C3660-I-Mz_20121-5_20T8.image

ILT: loaded table "mips64j" from cache.
ILT: loaded table "mips64e" from cache.
ILT: loaded table "ppc32j" from cache.
ILT: loaded table "ppc32e" from cache.
CPU0: carved JIT exec zone of 16 Mb into 512 pages of 32 Kb.
C3600 instance 'default' (id 0):
VM Status : 0
RAM size : 128 Mb
NVRAM size : 128 Kb
Chassis : 3640


<Edit>What worries me is that line that says Chassis : 3640 - when your image says c3660
[I just tried it on my system - mine says Chassis : 3640 as well :( - however, I'd still suggest that you try another image]</Edit>


I'd suggest that you try another image

_________________
RedNectar
http://rednectar.net
@rednectarchris
GNS3 WorkBench-a VMware image of Ubuntu with GNS3 and VPCS installed and a collection of exercises/labs


Top
 Profile  
 
 Post subject: Re: C3660 test fail
PostPosted: Wed Oct 15, 2014 9:02 pm 
Offline

Joined: Sun Sep 16, 2012 9:55 pm
Posts: 541
Location: England
rednectar wrote:
<Edit>What worries me is that line that says Chassis : 3640 - when your image says c3660
[I just tried it on my system - mine says Chassis : 3640 as well :( - however, I'd still suggest that you try another image]</Edit>
I had noticed that as well... I shall take a look into that as some point



_________________
Daniel
Forum Moderator & Debian Package Maintainer for GNS3, Dynamips & VPCS.
Standalone DEB Packages are available from http://gns3.serverb.co.uk - To be updated!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group

phpBB SEO