It is currently Tue Apr 25, 2017 8:26 pm


All times are UTC




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: no interface in cloud NIO Ethernet
PostPosted: Thu Oct 16, 2014 11:33 pm 
Offline

Joined: Thu Oct 16, 2014 11:18 pm
Posts: 4
Hello,
for some reason i cant add an interface to the cloud the list is empty as you can see in the image, i have tried many solution with no luck re install GNS3 upgrade it start it with admin privilege install Winpcap in windows 7 compatibility mode, when I try the same on the classic GNS3 its working perfectly this issue is only with v1.0

Image


Code:
=> show run
{
    "name": "untitled",
    "resources_type": "local",
    "topology": {
        "nodes": [
            {
                "description": "Cloud",
                "id": 1,
                "label": {
                    "color": "#000000",
                    "font": "TypeWriter,10,-1,5,75,0,0,0,0,0",
                    "text": "Cloud 1",
                    "x": 52.0,
                    "y": -25.0
                },
                "properties": {
                    "name": "Cloud 1",
                    "nios": []
                },
                "server_id": 1,
                "type": "Cloud",
                "x": -325.5,
                "y": -190.0
            }
        ],
        "servers": [
            {
                "host": "192.168.56.1",
                "id": 1,
                "local": true,
                "port": 8000
            }
        ]
    },
    "type": "topology",
    "version": "1.0beta4"
}
=>




Top
 Profile  
 
 Post subject: Re: no interface in cloud NIO Ethernet
PostPosted: Fri Oct 17, 2014 3:36 pm 
Offline

Joined: Sat Oct 04, 2014 8:38 am
Posts: 45
An earlier version of the beta had an issue displaying adapters with non-English characters:
topic4878.html

But you're using beta 4, the latest version so I don't know if it would affect it.


Top
 Profile  
 
 Post subject: Re: no interface in cloud NIO Ethernet
PostPosted: Fri Oct 17, 2014 8:13 pm 
Offline

Joined: Thu Oct 16, 2014 11:18 pm
Posts: 4
Hi,
all interfaces names are in English and my windows interface in English and GNS3 also English version i cant see why its a non English character issue


Top
 Profile  
 
 Post subject: Re: no interface in cloud NIO Ethernet
PostPosted: Fri Oct 17, 2014 10:56 pm 
Offline

Joined: Sat Oct 04, 2014 8:38 am
Posts: 45
hasan.jumaily wrote:
Hi,
all interfaces names are in English and my windows interface in English and GNS3 also English version i cant see why its a non English character issue


The Beta 4 Windows version has a serious bug:
post38886.html#p38886

This bug doesn't allow saved topos to load. You should check and see if this problem affects you before proceeding to use this release.

Just add a few devices to your topology, routers, switches, etc. Add an IOU device and save your project. Then try to reopen your project. If you get an error message like the following:

=> ****** Exception detected, traceback information saved in C:/Users/3940/AppData/Roaming/GNS3\exception.log ******

PLEASE REPORT ON development-f14.html OR http://github.com/GNS3/gns3-gui/issues

Traceback (most recent call last):
File "./gns3-gui\gns3\main_window.py", line 415, in _openRecentFileSlot
File "./gns3-gui\gns3\main_window.py", line 1223, in loadProject
File "./gns3-gui\gns3\topology.py", line 486, in load
TypeError: getRemoteServer() missing 1 required positional argument: 'ca_file'

Traceback (most recent call last):
File "./gns3-gui\gns3\main_window.py", line 415, in _openRecentFileSlot
File "./gns3-gui\gns3\main_window.py", line 1223, in loadProject
File "./gns3-gui\gns3\topology.py", line 486, in load
TypeError: getRemoteServer() missing 1 required positional argument: 'ca_file'


Then you should either revert to the 0.8.7 version, the GNS3 1.0 beta 3 version, or wait until the next release which will likely be out early next week.

So check out and see if you have this issue before you proceed with attempting to resolve your original issue.


Top
 Profile  
 
 Post subject: Re: no interface in cloud NIO Ethernet
PostPosted: Sat Oct 18, 2014 8:59 am 
Offline

Joined: Thu Oct 16, 2014 11:18 pm
Posts: 4
thanks for your reply, i was using 1.0 beta 2 when i face this problem so i updated GNS3 to beta 4 hoping this will solve this issue for me i don't want to use the classic GNS3 all my work and studying material in the new one


Top
 Profile  
 
 Post subject: Re: no interface in cloud NIO Ethernet
PostPosted: Sat Oct 18, 2014 9:25 pm 
Offline

Joined: Thu Oct 16, 2014 11:18 pm
Posts: 4
i just finde out what was causing the problem it was the COMODO anti-virus after uninstalling it the problem was gone




Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group

phpBB SEO