It is currently Tue Dec 05, 2023 6:30 pm

View unanswered posts | View active topics


Board index » GNS3 » Installation

All times are UTC




Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
kenc
 Post subject: Router serial number all the same ?
PostPosted: Tue Oct 21, 2014 5:47 pm 
Offline

Joined: Tue Oct 21, 2014 5:23 pm
Posts: 2
Hi, I have a small network that consists of 6 routers, 3 7200s and 3 3745 here is the config file



Code:
autostart = False
version = 0.8.4
[127.0.0.1:7202]
    workingdir = working
    udp = 10100
    [[7200]]
        image = /home/ken/ios/c7200-advipservicesk9-mz.152-4.S3.bin
        sparsemem = True
        ghostios = True
    [[ROUTER R8]]
        console = 2108
        aux = 2508
        cnfg = configs/R4.cfg
        slot1 = PA-8T
        s1/0 = R2 s1/1
        slot2 = PA-2FE-TX
        f2/1 = SW2 1
        x = 144.869131115
        y = -2.64009457249
        z = 1.0
[127.0.0.1:7201]
    workingdir = working
    udp = 10000
    [[7200]]
        image = /home/ken/ios/c7200-advipservicesk9-mz.152-4.S3.bin
        idlepc = 0x62af445c
        ghostios = True
    [[ROUTER R4]]
        console = 2003
        aux = 2101
        cnfg = configs/R4.cfg
        slot1 = PA-8T
        slot2 = PA-2FE-TX
        x = 124.007369069
        y = 100.146876342
        z = 1.0
    [[ROUTER R5]]
        console = 2004
        aux = 2102
        cnfg = configs/R5.cfg
        slot1 = PA-8T
        s1/0 = R2 s1/2
        x = -212.098312193
        y = -76.9892086626
        z = 1.0
    [[ROUTER R6]]
        console = 2005
        aux = 2103
        cnfg = configs/R6.cfg
        slot1 = PA-8T
        s1/0 = R2 s1/3
        x = -39.1092533056
        y = -144.627689592
        z = 1.0
    [[ROUTER R7]]
        console = 2006
        aux = 2106
        cnfg = configs/R7.cfg
        slot1 = PA-8T
        s1/0 = R2 s1/4
        x = 133.959997324
        y = -133.858930856
        z = 1.0
    [[ROUTER R2]]
        console = 2001
        aux = 2104
        cnfg = configs/R2.cfg
        slot1 = PA-8T
        s1/0 = R3 s1/0
        s1/1 = R8 s1/0
        s1/2 = R5 s1/0
        s1/3 = R6 s1/0
        s1/4 = R7 s1/0
        x = -46.4699586245
        y = -29.2599645353
        z = 1.0
    [[ROUTER R3]]
        console = 2002
        aux = 2105
        cnfg = configs/R3.cfg
        slot1 = PA-8T
        s1/0 = R2 s1/0
        slot2 = PA-2FE-TX
        f2/1 = SW2 2
        x = -164.436556568
        y = 104.937397748
        z = 1.0
    [[ETHSW SW2]]
        1 = access 1 R8 f2/1
        2 = access 1 R3 f2/1
        3 = access 1 nio_tap:tap0
        x = -24.6506125023
        y = 113.700138592
        z = 1.0
[GNS3-DATA]
    configs = configs
    workdir = working
    m11 = 0.826450318154
    m22 = 0.826450318154
    [[Cloud C1]]
        x = -232.420503624
        y = 206.630868433
        z = 1.0
        connections = SW2:3:nio_tap:tap0


The routers R3 & R8 have the same serial number, is there a way to change this ?

core-router3>sh inv
NAME: "Chassis", DESCR: "Cisco 7206VXR, 6-slot chassis"
PID: CISCO7206VXR , VID: , SN: 4279256517

NAME: "NPE400 0", DESCR: "Cisco 7200VXR Network Processing Engine NPE-400"
PID: NPE-400 , VID: , SN: 11111111

NAME: "module 0", DESCR: "I/O FastEthernet (TX-ISL)"
PID: C7200-IO-FE-MII/RJ, VID: , SN: 4294967295

NAME: "disk0", DESCR: "Cisco 7200 I/O PCMCIA Flash Disk, 64M"
PID: MEM-I/O-FLD64M , VID: , SN:

NAME: "module 1", DESCR: "Serial"
PID: PA-8T-X21= , VID: , SN: 4294967295

NAME: "module 2", DESCR: "Dual Port FastEthernet (RJ45)"
PID: PA-2FE-FX , VID: , SN: XXX00000000

NAME: "Power Supply 0", DESCR: "Cisco 7200 AC Power Supply"
PID: PWR-7200-AC , VID: , SN:

NAME: "Power Supply 1", DESCR: "Cisco 7200 AC Power Supply"
PID: PWR-7200-AC , VID: , SN:


core-router3>


core-router4>sh inv
NAME: "Chassis", DESCR: "Cisco 7206VXR, 6-slot chassis"
PID: CISCO7206VXR , VID: , SN: 4279256517

NAME: "NPE400 0", DESCR: "Cisco 7200VXR Network Processing Engine NPE-400"
PID: NPE-400 , VID: , SN: 11111111

NAME: "module 0", DESCR: "I/O FastEthernet (TX-ISL)"
PID: C7200-IO-FE-MII/RJ, VID: , SN: 4294967295

NAME: "disk0", DESCR: "Cisco 7200 I/O PCMCIA Flash Disk, 64M"
PID: MEM-I/O-FLD64M , VID: , SN:

NAME: "module 1", DESCR: "Serial"
PID: PA-8T-X21= , VID: , SN: 4294967295

NAME: "module 2", DESCR: "Dual Port FastEthernet (RJ45)"
PID: PA-2FE-FX , VID: , SN: XXX00000000

NAME: "Power Supply 0", DESCR: "Cisco 7200 AC Power Supply"
PID: PWR-7200-AC , VID: , SN:

NAME: "Power Supply 1", DESCR: "Cisco 7200 AC Power Supply"
PID: PWR-7200-AC , VID: , SN:


core-router4>

thanks
Ken
Top
 Profile  
 
Simon
 Post subject: Re: Router serial number all the same ?
PostPosted: Tue Nov 04, 2014 9:34 am 
Offline

Joined: Wed Oct 15, 2014 9:24 am
Posts: 1
i think as the serial number is from the manufacture the only way to do is to ask the manufacture or send these routers back to them ,the manufacturer and modify these serial numbers for you because i have never see manufacturer who can allow you to change their devices specification and i believe serial of most devices on newer routers such as the Cisco 2800 Series and 3800 Series, the serial number on the outside of the router, the processor ID, and the hardware chassis serial number are all are the same and thanks
Top
 Profile  
 
kenc
 Post subject: Re: Router serial number all the same ?
PostPosted: Tue Nov 04, 2014 3:38 pm 
Offline

Joined: Tue Oct 21, 2014 5:23 pm
Posts: 2
Thanks for the reply, but I'm sure you read the message and understand that these are NOT real sheet metal routers, but emulated .........
Top
 Profile  
 
rednectar
 Post subject: Re: Router serial number all the same ?
PostPosted: Thu Nov 06, 2014 2:42 am 
Offline

Joined: Fri Mar 05, 2010 11:33 am
Posts: 1494
Location: Australia
I'm pretty sure this is normal - I have no idea how the serial number is generated in the source code (but you could look on github if you wanted to https://github.com/GNS3/dynamips

Is there a problem being caused by the duplicate serial numbers?

BTW - most of the activity has moved to the new GNS3 forum at gns3.com

You may get a better response if you ask the question there.



_________________
RedNectar
http://rednectar.net
@rednectarchris
GNS3 WorkBench-a VMware image of Ubuntu with GNS3 and VPCS installed and a collection of exercises/labs
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 

Board index » GNS3 » Installation

All times are UTC


Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

phpBB SEO