It is currently Wed Jun 03, 2020 12:39 am

View unanswered posts | View active topics


Board index » GNS3 » General Issues

All times are UTC




Post new topic Reply to topic  Page 4 of 4
  [ 37 posts ]  Go to page Previous  1, 2, 3, 4
  Print view Previous topic | Next topic 
Author Message
claydon_dan
 Post subject: Re: *NEW* GNS3 Topology Converter
PostPosted: Tue Oct 07, 2014 6:19 pm 
Offline

Joined: Sun Sep 16, 2012 9:55 pm
Posts: 541
Location: England
@gns3er
gns3er wrote:
I converted a couple of topology files except for the one attached in case the dev wants to take a look at it


I've had a look at the topology and it's actually the old .net topology file which is broken and won't load correctly in GNS3 0.8.7.

The problem in detail is with the Ethernet Switch...
Code:
[[ETHSW SW0]]
1 = access 1
2 = access 1
3 = access 1
4 = access 1
x = -540.229580827
y = 21.2132034356
hx = 16.3431457505
hy = 16.0121933088


The four ports have no endpoint... (despite the reverse connection being present on the routers). The easiest way to fix this is to manually remove the ETHSW from the topology file and all connections to SW0. Then re-add the ETHSW through GNS3.

I shall also try and improve the error handling in the converter for this.



_________________
Daniel
Forum Moderator & Debian Package Maintainer for GNS3, Dynamips & VPCS.
Standalone DEB Packages are available from http://gns3.serverb.co.uk - To be updated!
Top
 Profile  
 
claydon_dan
 Post subject: Re: *NEW* GNS3 Topology Converter
PostPosted: Sat Oct 11, 2014 5:01 pm 
Offline

Joined: Sun Sep 16, 2012 9:55 pm
Posts: 541
Location: England
I have finally got around to implementing support for converting QEMU based devices (QEMU VM's, ASA, PIX, JunOS, IDS).

This is now available as v0.4.0

_________________
Daniel
Forum Moderator & Debian Package Maintainer for GNS3, Dynamips & VPCS.
Standalone DEB Packages are available from http://gns3.serverb.co.uk - To be updated!
Top
 Profile  
 
project76
 Post subject: Re: *NEW* GNS3 Topology Converter
PostPosted: Tue Oct 21, 2014 8:33 pm 
Offline

Joined: Tue Oct 21, 2014 8:30 pm
Posts: 1
I broke it with this one :)

Code:
autostart = False
version = 0.8.5
[127.0.0.1:7200]
    workingdir = C:\Users\Jamie\AppData\Local\Temp
    udp = 10001
    [[7200]]
        image = C:\Users\Jamie\GNS3\Images\c7200-advipservicesk9-mz.150-1.M.image
        idlepc = 0x606384b0
        sparsemem = True
    [[ROUTER C6506B]]
        console = 2104
        aux = 2504
        cnfg = configs\C6506B.cfg
        slot0 = C7200-IO-GE-E
        x = -436.0
        y = -326.0
        z = 1.0
[GNS3-DATA]
    configs = configs
    [[Cloud C1]]
        symbol = Host
        x = -465.5
        y = -186.5
        z = 1.0



Code:
GNS3 Topology Converter
Traceback (most recent call last):
  File "C:\Python34\lib\site-packages\cx_Freeze\initscripts\Console.py", line 27
, in <module>
  File "gns3-converter.py", line 17, in <module>
  File "C:\Users\daniel\Documents\GitHub\gns3-converter\gns3converter\main.py",
line 60, in main
  File "C:\Users\daniel\Documents\GitHub\gns3-converter\gns3converter\main.py",
line 104, in do_conversion
  File "C:\Users\daniel\Documents\GitHub\gns3-converter\gns3converter\converter.
py", line 237, in generate_nodes
  File "C:\Users\daniel\Documents\GitHub\gns3-converter\gns3converter\node.py",
line 459, in calc_cloud_connection
AttributeError: 'NoneType' object has no attribute 'split'
Top
 Profile  
 
mrrlg
 Post subject: Re: *NEW* GNS3 Topology Converter
PostPosted: Mon Oct 27, 2014 11:40 pm 
Offline

Joined: Thu Jul 18, 2013 11:12 pm
Posts: 4
Running GNS3 on Windows 7 64 bit without issue. Upgraded to 1.1 without doing my homework. Now have a couple of hundred labs that don't open. Downloaded the converter tool. It fails with the following error:
Cannot open topology file. I have attached a screen shot of the error.


Attachments:
gns3 converter issues.png
gns3 converter issues.png [ 4.46 KiB | Viewed 29944 times ]
Top
 Profile  
 
dazzyboi84
 Post subject: Re: *NEW* GNS3 Topology Converter
PostPosted: Wed Oct 29, 2014 3:45 pm 
Offline

Joined: Thu Nov 14, 2013 2:00 pm
Posts: 7
Can someone please give me a real world example of converting these files please on microsort command line




my converter tool is located in



C:\Program Files (x86)\GNS3 Converter






However my project folders are located in



C:\Users\user\Dropbox\Darrens CCNA Learning\Main GNS3 Project Folder\Labs based on ICND1



If I open



c:\Program Files (x86)\GNS3 Converter>gns3-converter C:\Users\user\Dropbox\Darrens CCNA Learning\Main GNS3 Project Folder\Labs based on ICND1



it does not run, do you have to copy the whole project folder in to the conversion application directory, including the folder with the configs?file directories to the converter application folder? iv tried this, still no joy, what is the score here?







Bit annoyed that this option was not built in to GNS3. And the bugs that I am experiencing when trying to convert my old files
Top
 Profile  
 
rednectar
 Post subject: Re: *NEW* GNS3 Topology Converter
PostPosted: Wed Oct 29, 2014 9:42 pm 
Offline

Joined: Fri Mar 05, 2010 11:33 am
Posts: 1494
Location: Australia
Suggest you try
Code:
gns3-converter "C:\Users\user\Dropbox\Darrens CCNA Learning\Main GNS3 Project Folder\Labs based on ICND1" - o "C:\Users\user\Dropbox\Darrens CCNA Learning\Main GNS3 Project Folder\Labs based on ICND1"


Note:
1. The use of "" because you have spaces in your filenames
2. the -o option to say please put the output back in the same folder

- you may actually have to add the name of the topology file (topology.net) in that command:
Code:
gns3-converter "C:\Users\user\Dropbox\Darrens CCNA Learning\Main GNS3 Project Folder\Labs based on ICND1\topology,net" - o "C:\Users\user\Dropbox\Darrens CCNA Learning\Main GNS3 Project Folder\Labs based on ICND1"

_________________
RedNectar
http://rednectar.net
@rednectarchris
GNS3 WorkBench-a VMware image of Ubuntu with GNS3 and VPCS installed and a collection of exercises/labs
Top
 Profile  
 
[email protected]
 Post subject: Re: *NEW* GNS3 Topology Converter
PostPosted: Fri Nov 07, 2014 11:07 pm 
Offline

Joined: Tue Oct 07, 2014 3:00 pm
Posts: 1
i only used it a few times. but so far no errors. this is greatly appreciated, thanks
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 4 of 4
  [ 37 posts ]  Go to page Previous  1, 2, 3, 4

Board index » GNS3 » General Issues

All times are UTC


Who is online

Users browsing this forum: Alexa [Bot], Google [Bot] and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group

phpBB SEO