Hi,

OK it is much better. Thanks.

Only three questions, OK?

1. Is there any way how to fix displaying warning messages X times when X routers are configured together? Users usually don't know that they must hit "OK" or "x" button so many times as they have routers (configured the same time) for closing warning message. It is a little bit annoying to hit the button OK but message is still there ;-)
Personally I would prefer to show this warning window only once for each group of router's configuration.

2. Another issue: When you uncheck "Show this message again" it can really help with a problem showing X warning mesages . On the other hand after doing this when you add new 7200p routers to the topology there is not any warning message for non-working port adapters. When you don't remember all the non-working stuff very first time you configured 7200p you can choose PA (IO) without warning and you might suppose that it is working.


2. Is it possible to increase size of warning messages window? It looks like it is cut off. See the attachment , please.

just 2 my cents,

and big thanks again

_________________
Brezular

http://brezular.wordpress.com

I made some changes to try to correct this excepting for this issue:



Thanks for your reports, it helps.

_________________
Jeremy, GNS3 Programmer & Benevolent Dictator for Life.

It works. Thank you very much.

Cheers,

_________________
Brezular

http://brezular.wordpress.com

7200p-adventerprisek9-mz.150-1.M.bin support BGP as 2.0

c7200p-adventerprisek9-mz.124-24.T2.bin
c7200p-adventerprisek9-mz.124-4.XD11.bin
c7200p-adventerprisek9-mz.122-33.SRC1.bin

unpacked thease file


GNS 3.72 support NPE-G2 and boot , no problem



image = /Users/xxxxxxxx/Documents/Dynagen/images/7200p-adventerprisek9-mz.150-1.M.bin

ram = 256
nvram = 1024
disk0 = 64
disk1 = 64
confreg = 0x2102
mmap = true
midplane = vxr
npe = npe-g2