Hi,
There are some differences if you want to set up CME 7.0(1) on c7200-adventerprisek9-mz.124-22.T or
CME 7.1 on c7200-adventerprisek9-mz.124-24.T
(everything except 3 steps bellow is the same as when you set up 4.3.0.0 on 3725, see the link).

http://www.brainbump.net/2008/06/how-to ... sing-gns3/

1. format disk0:
2. archive tar /xtract tftp://<TFTP Server IP>/cme-full-7.0.0.1.tar disk0:
3. ip http path disk0:/gui

So you can have the last version of CME -> 7.1 on GNS3 when you use 7200 platform

Hope this helps someone...

_________________
Brezular

All my tutorials can be found here:
http://brezular.com

No need to flaf about with the cme file. Just increase the disk0 with "disk0 = 128" on the GNS3 .net file, can put it just after the ram.

Guy was asking increasing flash for CME. Some people find useful they can have CME 7.1 in GNS3 although 7200 platform is not on the list of supported platforms for CME.

_________________
Brezular

All my tutorials can be found here:
http://brezular.com