Hi,

I did every thing with Qemu Host in GNS3 0.7.2 on windows XP platform

“Identifier: Microcore
Binary image: local path to linux-microcore-2.10.img
Memory: 32 MB
NIC: e1000
Qemu options: -no-acpi
Save, OK, drag & drop Qemu host symbol and a Cisco router on the scene. Connect the 2 nodes with a Ethernet link. Start the devices”

1st time I start QEMU I get


2nd time


how can I get this prompt…..?


please help!!!!!!!!!!!!!!!!
Regards
Kashif

Try to add more RAM, like 48MB or even 64MB.

Cheers,

_________________
Jeremy, GNS3 Programmer & Benevolent Dictator for Life.

i did increase the RAM but didn't work,

Reg
K

Use this link http://docs.google.com/View?id=dfzhd6z4_397g3jjf4db to solve your issue, But you can use only one linux microcore.img at a time, this is an error people like Jeremy are trying to solve this issue. When this issue is fixed means you can use many linux microcore.img

regards,
Kishore

Thanks,

But I tried all the options which are available on gns web site & this one too, any other solution plz!!!!!!!!!!!!!!!!

Reg

kashif

Use the following commands

* Assign IP address for eth0 interface using command:

sudo su
ifconfig eth0 10.10.10.2 netmask 255.255.255.0 up

* To verify what ip address eth0 interface has use following command

ifconfig eth0

Kishore

Dear Kishore


I cant get prompt when I start Qemu Host in GNS. How come I configure eth0………….?

plz help.................:(

K

hello


any one can help me...................................?



Kashif

Issue has been resolved, the issue was with the “linux-microcore-2.10.img” which I downloaded from GNS mentioned link. Now I have tried some other images. its work:)

Thanx

Kashif

Thanks for the exact steps, Kishore. I am not very proficient with Linux. Your clear instructions helped me a lot. Thanks again.

_________________
Regards,

Chirag Rao| PreSales Engineer | Cyberoam Technologies Pvt. Ltd.,
M. +91 9727768659 | Ahmedabad - India