hi,
I have a problem with GNS configuration.
I use the NM-16ESW for switching but in the console the commands of vlan(vlan database...) are not accepted.
please what is the probleme?

thanks

Router#vl
Router#vlan ?
database Configure VLAN database

Router#vlan
------------------------------
Router(config)#vlan 3
Router(config-vlan)#exit
Router(config)#do show vlan-switch | i VLAN0003
3 VLAN0003 active
Router(config)#

-------------------------------
Router#show version | i IOS
Cisco IOS Software, 3700 Software (C3725-ADVENTERPRISEK9-M), Version 12.4(15)T9, RELEASE SOFTWARE (fc5)
Router#

thanks but the problem is that when a put the command I have this message "invalid input detected...."
Is

put the output like i did...and also iso version

sorry It s the first time I use GNS and thanks a lot.
that's the result

#vl
translating "vl"
% unknown command or computer name ,or unable to find computer address
#vlan ?
%unrecognized command
(config)#vlan 3
%invalid input detected at '^' marker.


about version IOS
IOS (tm) 3600 Software (C3620-I-M),Version 12.2(15)T10, Release Software (fc2)

change the IOS.

thanks a lot.
I have used the 3700(c3725) and it is ok.