It is currently Thu Oct 17, 2019 10:58 pm


All times are UTC




Post new topic Reply to topic  [ 24 posts ]  Go to page Previous  1, 2, 3
Author Message
 Post subject: Re: More interfaces for Qemu image
PostPosted: Thu Aug 05, 2010 9:00 am 
brezular wrote:
Hi,

I did test of connectivity between interfaces for Junos 10.1R1.8, Microcore 2.11.5, Lisa 2.0.2 with qemu 0.12.5 (seabios off).

Quote:
https://spreadsheets.google.com/ccc?key=0AqL2h6R5UKMhdGZYajA2S3l2UU84ZndkZDE5VWlPcnc&hl=en&authkey=CK_C9tcB



I can confirm that problem with eth2 interface still persists in Olive.

Cheers,

So looking at your test results you are also limited to interface up to em7. Is this JUNOS limitation?

Thanks




Top
  
 
 Post subject: Re: More interfaces for Qemu image
PostPosted: Thu Aug 05, 2010 11:06 am 
Offline

Joined: Mon Nov 10, 2008 10:31 am
Posts: 555
Location: Slovakia
Hi,

All ten NICs are presented in JUNOS but you can't configure more than 8 interfaces.

Warning message "device value outside range 0..7" comes from JUNOS so it should be JUNOS limitation (not Qemu or FreeBSD)

root> show interfaces terse
Interface Admin Link Proto Local Remote
cbp0 up up
demux0 up up
dsc up up
em0 up up
em1 up up
em2 up up
em3 up up
em4 up up
em5 up up
em6 up up
em7 up up
em8 up up
em9 up up
gre up up
ipip up up
irb up up
lo0 up up
lo0.16384 up up inet 127.0.0.1 --> 0/0
lo0.16385 up up inet 128.0.0.4 --> 0/0
inet6 fe80::200:abff:fed3:700
lsi up up
mtun up up
pimd up up
pime up up
pip0 up up
pp0 up up
tap up up

_________________
Brezular

All my tutorials can be found here:
http://brezular.com


Top
 Profile  
 
 Post subject: Re: More interfaces for Qemu image
PostPosted: Thu Aug 05, 2010 11:57 am 
brezular wrote:
Hi,

All ten NICs are presented in JUNOS but you can't configure more than 8 interfaces.

Warning message "device value outside range 0..7" comes from JUNOS so it should be JUNOS limitation (not Qemu or FreeBSD)

root> show interfaces terse
Interface Admin Link Proto Local Remote
cbp0 up up
demux0 up up
dsc up up
em0 up up
em1 up up
em2 up up
em3 up up
em4 up up
em5 up up
em6 up up
em7 up up
em8 up up
em9 up up
gre up up
ipip up up
irb up up
lo0 up up
lo0.16384 up up inet 127.0.0.1 --> 0/0
lo0.16385 up up inet 128.0.0.4 --> 0/0
inet6 fe80::200:abff:fed3:700
lsi up up
mtun up up
pimd up up
pime up up
pip0 up up
pp0 up up
tap up up

Hi,
Thanks for confirming...just wanted to make sure it was not my olive img that i am using....

Thanks


Top
  
 
 Post subject: Re: More interfaces for Qemu image
PostPosted: Wed Oct 05, 2011 11:35 am 
Hi,

i have the same issue, but it is a commit issue:

Code:
[email protected]# run show interfaces terse
Interface               Admin Link Proto    Local                 Remote
dsc                     up    up
em0                     up    down
em1                     up    down
em1.0                   up    down inet
em2                     up    down
em3                     up    down
em4                     up    down
em5                     up    up
em5.0                   up    up   inet     10.100.1.49/24
em6                     up    down
em7                     up    down
em8                     up    down
em9                     up    up
gre                     up    up
ipip                    up    up
lo0                     up    up
lo0.16384               up    up   inet     127.0.0.1           --> 0/0
lo0.16385               up    up   inet
lo0.32768               up    up
lsi                     up    up
mtun                    up    up
pimd                    up    up
pime                    up    up
tap                     up    up



so interfaces em8 and em9 are present and admin up, but therefor i can't configure it:

Code:
[edit interfaces]
[email protected]# set em9 unit 0 family inet
                                                 ^
device value outside range 0..7 for '9' in 'em9'.

[edit interfaces]
[email protected]# set em7 unit 0 family inet

[edit interfaces]


anybody any idea ?

i'm running olive in a vmware workstation,

Code:
[email protected]# run show version
Hostname: jnpr93r44-1
Model: olive
JUNOS Software Release [9.3R4.4] (Export edition)




Top
  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 24 posts ]  Go to page Previous  1, 2, 3

All times are UTC


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

phpBB SEO