It is currently Thu May 23, 2019 9:53 am


All times are UTC




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: L3 Etherchannel with the NM-16ESW
PostPosted: Wed Aug 15, 2012 1:00 am 
Offline

Joined: Thu Aug 09, 2012 12:07 am
Posts: 2
I'm using c3745-adventerprisek9-mz.124-25c and it's not allowing to create a L3 Etherchannel with the NM-16ESW.

So it's a mystery for me how Jeremy Cioara has created it in his "Cisco for the real world" series.
I found a similar question here, but I see that he was able to do it with the
Code:
channel-group 1 mode on
command!
He used c3745-entbasek9-mz.124-25c IOS in the videos. Is it different from the advanced IOS that I use?

Can anybody tell me what's his secret is?




Top
 Profile  
 
 Post subject: Re: L3 Etherchannel with the NM-16ESW
PostPosted: Wed Aug 15, 2012 10:56 pm 
Offline

Joined: Thu Aug 09, 2012 12:07 am
Posts: 2
Quote:
He used c3745-entbasek9-mz.124-25c IOS in the videos. Is it different from the advanced IOS that I use?

Nope, just tried c3745-entbasek9-mz.124-18, the result is the same:(
Are there other ways to do the etherchannel?


Top
 Profile  
 
 Post subject: Re: L3 Etherchannel with the NM-16ESW
PostPosted: Sun Aug 19, 2012 5:25 am 
Offline

Joined: Thu May 10, 2012 3:12 pm
Posts: 29
Hi all,

me also, cannot configure IP under the po1 interface. huhuh


Top
 Profile  
 
 Post subject: Re: L3 Etherchannel with the NM-16ESW
PostPosted: Sun Sep 30, 2012 10:19 am 
Offline

Joined: Sun Sep 30, 2012 9:19 am
Posts: 10
Location: Norway
I don't know if you guys already figured out the solution for creating etherchannels with the NM-16ESW.

I am using an 3745 running ios c3745-is-mz.123-26 and I am able to create etherchannels between two 3745 on gns3.


Top
 Profile  
 
 Post subject: Re: L3 Etherchannel with the NM-16ESW
PostPosted: Sun Sep 30, 2012 3:46 pm 
Offline

Joined: Sun Apr 25, 2010 4:57 pm
Posts: 214
Known GNS issue:
You can configure L2 Etherchannel, but restricted. no way to lacp
GNS doesnt support L3 etherchannel with IP.


Top
 Profile  
 
 Post subject: Re: L3 Etherchannel with the NM-16ESW
PostPosted: Wed Oct 03, 2012 8:12 pm 
Offline

Joined: Sun Sep 30, 2012 9:19 am
Posts: 10
Location: Norway
You're right UldisD. I did't realized that uname was talking about L3 Etherchannel.
Jeremy Cioara on his "Cisco for the real world" creates (just like I did) L2 Etherchannel.




Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

phpBB SEO