It is currently Sun Nov 17, 2019 9:16 pm


All times are UTC




Post new topic Reply to topic  [ 59 posts ]  Go to page 1, 2, 3, 4, 5, 6  Next
Author Message
 Post subject: Re: GNS3 0.8.4 is out!
PostPosted: Sat Jul 06, 2013 6:53 am 
Offline
Site Admin

Joined: Sat Oct 11, 2008 1:41 pm
Posts: 2668
Location: Canada
@rednectar

Quote:
OOOPs the check for dynamips version when you do the AutoCalc of Idle-pc doesn't recognise the latest dynamips.


Indeed, oops... you will have to use Dynamips 0.2.8 RC7 (http://sourceforge.net/projects/gns-3/f ... community/) in order to use Autocalc.

Ok let's schedule a 0.8.4.1 release at the end of this month to fix these kind of bugs. I am sure you will find more ;)

Quote:
I notice that Dynamips 0.2.8-RC3 is the default dynamips for OS-X. Is that intentional?


Yes this is intentional. I noticed that recent versions of Dynamips do not work well with Generic Ethernet NIOs, I suspect a compilation issue or pcap library problem. I encourage you to test the last version on OSX to confirm this.

Thanks,



_________________
Jeremy, GNS3 Programmer & Benevolent Dictator for Life.


Top
 Profile  
 
 Post subject: Re: GNS3 0.8.4 is out!
PostPosted: Sat Jul 06, 2013 6:57 am 
Offline
Site Admin

Joined: Sat Oct 11, 2008 1:41 pm
Posts: 2668
Location: Canada
@Jason

Quote:
Nicely done Jeremy. GNS3-0.8.4 is a tremendous improvement over 0.8.3.1. I would like to extend my thanks to everyone who contributed to the new release, so... THANK YOU!


You are welcome :) I've already something even better in mind.

_________________
Jeremy, GNS3 Programmer & Benevolent Dictator for Life.


Top
 Profile  
 
 Post subject: Re: GNS3 0.8.4 is out!
PostPosted: Sat Jul 06, 2013 8:54 am 
Offline

Joined: Mon Jul 01, 2013 12:51 am
Posts: 4
does this version compatible with Windows 8? Last version i ran i can ping the asa between dyn and qemu host. please advise. thanks


Top
 Profile  
 
 Post subject: Re: GNS3 0.8.4 is out!
PostPosted: Sat Jul 06, 2013 9:14 am 
Offline

Joined: Mon Jul 01, 2013 12:51 am
Posts: 4
already running error on qemu. unable to start and files was not in folder. does anyone know what i need to do to resolve this?


Top
 Profile  
 
 Post subject: Re: GNS3 0.8.4 is out!
PostPosted: Sat Jul 06, 2013 9:24 am 
Offline

Joined: Fri Mar 05, 2010 11:33 am
Posts: 1494
Location: Australia
@Jeremy
Quote:
I am sure you will find more ;)

Workin' hard at it!!!!!!

But I must also say thanks for all your hard work. The install for Windows is nice the way it invites you to sign up for an updates newsletter and the thank-you screen.

_________________
RedNectar
http://rednectar.net
@rednectarchris
GNS3 WorkBench-a VMware image of Ubuntu with GNS3 and VPCS installed and a collection of exercises/labs


Top
 Profile  
 
 Post subject: Re: GNS3 0.8.4 is out!
PostPosted: Sat Jul 06, 2013 1:52 pm 
Offline

Joined: Sat Jul 28, 2012 2:03 pm
Posts: 54
grossmj wrote:
Indeed, oops... you will have to use Dynamips 0.2.8 RC7 (http://sourceforge.net/projects/gns-3/f ... community/) in order to use Autocalc.

Hello. I have downloaded the dynamips-0.2.8-RC7-community-x86-cygwin.zip and replaced all files in GNS3 folder, in order to work properly I should press Test Settings button in Dynamips tab, otherwise error still appears.


Top
 Profile  
 
 Post subject: Re: GNS3 0.8.4 is out!
PostPosted: Sat Jul 06, 2013 11:11 pm 
Offline

Joined: Mon Jul 01, 2013 12:51 am
Posts: 4
This is awesome. installing the new qemu fix the ping issue between qemu and dyn host. works with windows 8, finally. :)


Top
 Profile  
 
 Post subject: Re: GNS3 0.8.4 is out!
PostPosted: Sun Jul 07, 2013 1:20 am 
Offline

Joined: Mon Sep 19, 2011 6:19 am
Posts: 192
Location: Australia
Hi Jeremy et al :)

It has been a while. I hope you all have been doing well and busy developing this great piece of art :)

I've got the same bug reported earlier by Chris.

Image

The other thing, when I point Dynamips to use a RAMDisk (located in /mnt/RAMDisk), GNS3 crashes and none of the settings I applied (by pressing OK) would work. It, however, works the second or third time. I should have mentioned that the same issue I had in the RC version of 0.8.4.

Image

_________________
ImageImageImageImage


Top
 Profile  
 
 Post subject: Re: GNS3 0.8.4 is out!
PostPosted: Sun Jul 07, 2013 1:29 am 
Offline

Joined: Mon Sep 19, 2011 6:19 am
Posts: 192
Location: Australia
On a side note, Qemu is finally working :) I spent hours and hours trying to get it working on Ubuntu without any luck. I hope that I can jump back again into the video tutorial wagons and upload more.

_________________
ImageImageImageImage


Top
 Profile  
 
 Post subject: Re: GNS3 0.8.4 is out!
PostPosted: Mon Jul 08, 2013 6:57 pm 
Offline

Joined: Sun Sep 16, 2012 9:55 pm
Posts: 541
Location: England
Just though I'd give everyone an update regarding the DEB packages. I am currently in the process of setting up a GNS3 PPA (Personal Package Archive), which should aid the distribution of GNS3 and Dynamips (+ others) to any machine running a Ubuntu based distro.

At the moment I am just testing to make sure the packages that are built will be suitable for the various distro releases. As soon as this is done I shall provide details on how to make use of the new PPA.



_________________
Daniel
Forum Moderator & Debian Package Maintainer for GNS3, Dynamips & VPCS.
Standalone DEB Packages are available from http://gns3.serverb.co.uk - To be updated!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 59 posts ]  Go to page 1, 2, 3, 4, 5, 6  Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

phpBB SEO