It is currently Sun Aug 09, 2020 8:45 pm


All times are UTC




Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: ASA 8.0.2 error on boot
PostPosted: Wed Nov 27, 2013 4:14 pm 
Offline

Joined: Wed Nov 27, 2013 4:05 pm
Posts: 1
Hello all. First time poster here. So I have been able to get an ASA running 8.4.2 up and running correctly. However I can't get my 8.0.2 ASA to boot properly.This is running GNS3 0.8.6. Here is the output that I get upon starting the ASA.



# ls
first_start.sh format_flash.sh fsck_flash.sh
# ./first_start.sh
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
test: yes: unknown operand

Processor memory 733376512, Reserved memory: 41943040 (DSOs: 0 + kernel: 41943040)
Guest RAM start: 0xb4400080
Guest RAM end: 0xdd400000
LINA unit number: 1
Guest RAM brk: 0xb4401000

MKDIR failed No such file or directory for /var/log/
Welcome to LINA - ( F1-on-Linux platform ) desktop version!

********************************************************************
* WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING *
* *
* This product is for Cisco internal use ONLY!!! *
* *
* WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING *
********************************************************************

i2c_read_byte_w_wait() error, slot = 0x4, device = 0xb0, address = 0 byte count = 1. Reason: I2C_SMBUS_UNSUPPORT

Total SSMs found: 0
Ignoring PCI card in slot:0 (vendor:0x0 deviceid:0x0)
Ignoring PCI card in slot:1 (vendor:0x0 deviceid:0x0)
Ignoring PCI card in slot:2 (vendor:0x0 deviceid:0x0)
Ignoring PCI card in slot:3 (vendor:0x0 deviceid:0x0)
Ignoring PCI card in slot:4 (vendor:0x0 deviceid:0x0)
Ignoring PCI card in slot:5 (vendor:0x0 deviceid:0x0)
Ignoring PCI card in slot:6 (vendor:0x0 deviceid:0x0)

Total NICs found: 6
setup_irq: irq handler mismatch
<de12e376> <de12eaa0>
<de12e40a> <de12edb6>
<de12eaa0> <de12ed40>
<de148db3> <de149027>
<de148984> <de14906e>
<de149126> <de102a97>
Unable to open /proc/irq/15/irq error: Device or resource busy
Panic: kernel - intr_establish: open interupt descriptor irq 15


-----------------------------------------------
Traceback output aborted.
Flushing first exception frame:
Abort: Assert failure
vector 0x00000000
edi 0x0000000f
esi 0xb4a4a678
ebp 0xb43f7658
esp 0xb43f764c
ebx 0x000000f2
edx 0xb43f7690
ecx 0x00000006
eax 0x00000000
error code n/a
eip 0xdd6a72a1
cs 0x00000073
eflags 0x00000246
CR2 0x00000000
Nested traceback attempted via signal, from:
Page fault: Address not mapped
vector 0x0000000e
edi 0xb43f70db
esi 0xb43f70bf
ebp 0xb43f6fe8
esp 0xb43f6fa0
ebx 0xb43f70bf
edx 0x08acd5d8
ecx 0x00000000
eax 0x00000000
error code 0x00000004
eip 0x0805ee77
cs 0x00000073
eflags 0x00000286
CR2 0x00000084

An internal error occurred. Specifically, a programming assertion was
violated. Copy the error message exactly as it appears, and get the
output of the show version command and the contents of the configuration
file. Then call your technical support representative.

assertion "_vf_mode_init" failed: file "vf_api.c", line 99



Rebooting....

Has anyone else run into this issue? Thanks in advance!!!




Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group

phpBB SEO