|GNS3 and Real Switches - Resolve multicast issues !
|Page 1 of 1|
|Author:||NetAdmin [ Sun Jan 12, 2014 5:24 am ]|
|Post subject:||GNS3 and Real Switches - Resolve multicast issues !|
If you are using GNS3 installed on Windows 7 64 bit connected to some real switch then you may experience some multicast issues because the "Reliable multicast protocol" is not enabled by default on Windows 7.
Basically OSPF will flap and EIGRP will form one way relationship:
*Mar 1 00:02:12.035: %OSPF-5-ADJCHG: Process 1, Nbr 126.96.36.199 on FastEthernet0/0 from INIT to DOWN, Neighbor Down: Interface down or detached
To resolve the above issues you have to enable the reliable multicast protocol under the interface connected to the breakout switch.
How to configure the reliable multicast protocol in windows 7:
http://www.cisco.com/web/about/ac123/ac ... icast.html
How to configure network protocol in windows 7:
|Page 1 of 1||All times are UTC|
|Powered by phpBB® Forum Software © phpBB Group