GNS3
http://forum.gns3.net/

Appear two Active in HSRP
http://forum.gns3.net/topic5398.html
Page 1 of 1

Author:  zerorez [ Sun Sep 30, 2012 12:20 pm ]
Post subject:  Appear two Active in HSRP

when simulate HSRP, failed to ping

(c7200)(Router1)
f0/0
|
f1/0
EtherSwitch2(Switch 2) f2/0 --- f1/0 EtherSwitch 1 (Switch1)

EtherSwitch2 simulated a host to ping HSRP 172.16.0.254
but failed, i found sh standby in Switch1 and Router1, they are both active router, no standby router
and another odd thing is sh ip arp in Switch2 do not have 172.16.0.254

Router 1
config t
int f0/0
ip address 172.16.0.2 255.255.0.0
no shutdown
end

config t
int f0/0
speed 100
duplex full
end

Switch 1
config t
ip routing
int f1/0
no switchport
ip address 172.16.0.3 255.255.0.0

Router 1
config t
int f0/0
standby 1 ip 172.16.0.254
standby 1 priority 200

Switch 1
config t
int f1/0
standby 1 ip 172.16.0.254
end

Switch 2
config t
int vlan 1
ip address 172.16.0.4 255.255.0.0
no shutdown
end

ping 172.16.0.254
sh ip arp

https://skydrive.live.com/redir?resid=E0ED7271C68BE47C!206
https://skydrive.live.com/redir?resid=E0ED7271C68BE47C!205

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/