GNS3
http://forum.gns3.net/

EIGRP over Frame-Relay MultiPoint Physical Interface
http://forum.gns3.net/topic6575.html
Page 1 of 1

Author:  fly03238 [ Tue Jul 02, 2013 7:52 am ]
Post subject:  EIGRP over Frame-Relay MultiPoint Physical Interface

EIGRP over Frame-Relay MultiPoint Physical Interface
http://ciscofreelabs.blogspot.tw/2013/0 ... point.html

more LABs:
http://ciscofreelabs.blogspot.tw/

Note:

This is Frame-Relay Hub and Spoke Topology ,
R1 is "Hub" Router , so R1 must to disable the ip split-horizon , use the "no ip split-horizon eigrp 100" command.

The Frame-Relay PVC has full mash.

Image

Image



=================================================
R1#
R1#
!
hostname R1
!
interface Loopback0
ip address 1.1.1.1 255.255.255.255
!
!
interface Serial1/0
ip address 10.1.1.1 255.255.255.0
encapsulation frame-relay
no ip split-horizon eigrp 100
frame-relay map ip 10.1.1.4 104 broadcast
frame-relay map ip 10.1.1.3 103 broadcast
frame-relay map ip 10.1.1.2 102 broadcast
!
!
router eigrp 100
network 1.1.1.1 0.0.0.0
network 10.1.1.0 0.0.0.255
no auto-summary
!
R1#
=================================================


=================================================
R2#
R2#
!
hostname R2
!
interface Loopback0
ip address 1.1.1.2 255.255.255.255
!

interface Serial1/0
ip address 10.1.1.2 255.255.255.0
encapsulation frame-relay
frame-relay map ip 10.1.1.1 201 broadcast
!

router eigrp 100
network 1.1.1.2 0.0.0.0
network 10.1.1.0 0.0.0.255
no auto-summary
!

R2#
R2#
=================================================

=================================================
R3#
!
hostname R3
!
!
interface Loopback0
ip address 1.1.1.3 255.255.255.255
!
!
interface Serial1/0
ip address 10.1.1.3 255.255.255.0
encapsulation frame-relay
frame-relay map ip 10.1.1.1 301 broadcast
!
router eigrp 100
network 1.1.1.3 0.0.0.0
network 10.1.1.0 0.0.0.255
no auto-summary
!
=================================================


=================================================
R4#
R4#
!
hostname R4
!
interface Loopback0
ip address 1.1.1.4 255.255.255.255
!
!
interface Serial1/0
ip address 10.1.1.4 255.255.255.0
encapsulation frame-relay
frame-relay map ip 10.1.1.1 401 broadcast
!
router eigrp 100
network 1.1.1.4 0.0.0.0
network 10.1.1.0 0.0.0.255
no auto-summary
!
=================================================


=================================================

R1#ping 1.1.1.2

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 36/75/108 ms
R1#ping 1.1.1.3

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/53/92 ms
R1#ping 1.1.1.4

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.4, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/56/124 ms
R1#
R1#show frame-relay map
Serial1/0 (up): ip 10.1.1.2 dlci 102(0x66,0x1860), static,
broadcast,
CISCO, status defined, active
Serial1/0 (up): ip 10.1.1.3 dlci 103(0x67,0x1870), static,
broadcast,
CISCO, status defined, active
Serial1/0 (up): ip 10.1.1.4 dlci 104(0x68,0x1880), static,
broadcast,
CISCO, status defined, active
R1#
R1#
R1#show frame-relay pvc

PVC Statistics for interface Serial1/0 (Frame Relay DTE)

Active Inactive Deleted Static
Local 3 0 0 0
Switched 0 0 0 0
Unused 0 0 0 0

DLCI = 102, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0

input pkts 127 output pkts 132 in bytes 8462
out bytes 8856 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 108 out bcast bytes 6912
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 01:36:05, last time pvc status changed 01:34:26

DLCI = 103, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0

input pkts 123 output pkts 128 in bytes 8128
out bytes 8437 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 108 out bcast bytes 6912
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 01:36:06, last time pvc status changed 01:34:27

DLCI = 104, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0

input pkts 136 output pkts 138 in bytes 9120
out bytes 9562 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 108 out bcast bytes 6912
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 01:36:06, last time pvc status changed 01:34:28
R1#

R1#
R1#show frame-relay lmi

LMI Statistics for interface Serial1/0 (Frame Relay DTE) LMI TYPE = ANSI
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Sent 580 Num Status msgs Rcvd 577
Num Update Status Rcvd 0 Num Status Timeouts 3
Last Full Status Req 00:00:00 Last Full Status Rcvd 00:00:00
R1#
R1#
R1#show ip eigrp neighbors
IP-EIGRP neighbors for process 100
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
2 10.1.1.2 Se1/0 136 01:34:27 399 2394 0 15
1 10.1.1.4 Se1/0 170 01:34:27 153 918 0 15
0 10.1.1.3 Se1/0 149 01:34:27 295 1770 0 15
R1#
R1#
R1#
R1#show ip eigrp topology
IP-EIGRP Topology Table for AS(100)/ID(1.1.1.1)

Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - reply Status, s - sia Status

P 1.1.1.1/32, 1 successors, FD is 128256
via Connected, Loopback0
P 1.1.1.3/32, 1 successors, FD is 2297856
via 10.1.1.3 (2297856/128256), Serial1/0
P 1.1.1.2/32, 1 successors, FD is 2297856
via 10.1.1.2 (2297856/128256), Serial1/0
P 1.1.1.4/32, 1 successors, FD is 2297856
via 10.1.1.4 (2297856/128256), Serial1/0
P 10.1.1.0/24, 1 successors, FD is 2169856
via Connected, Serial1/0
R1#

R1#
R1#sh ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

1.0.0.0/32 is subnetted, 4 subnets
C 1.1.1.1 is directly connected, Loopback0
D 1.1.1.3 [90/2297856] via 10.1.1.3, 01:34:55, Serial1/0
D 1.1.1.2 [90/2297856] via 10.1.1.2, 01:34:55, Serial1/0
D 1.1.1.4 [90/2297856] via 10.1.1.4, 01:28:14, Serial1/0
10.0.0.0/24 is subnetted, 1 subnets
C 10.1.1.0 is directly connected, Serial1/0
R1#
R1#

=================================================


=================================================

R2#
R2#ping 1.1.1.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 76/109/164 ms
R2#ping 1.1.1.3

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 48/79/96 ms
R2#ping 1.1.1.4

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.4, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 28/67/104 ms
R2#
R2#
R2#show frame-relay map
Serial1/0 (up): ip 10.1.1.1 dlci 201(0xC9,0x3090), static,
broadcast,
CISCO, status defined, active
Serial1/0 (up): ip 10.1.1.3 dlci 203(0xCB,0x30B0), dynamic,
broadcast,, status defined, active
Serial1/0 (up): ip 10.1.1.4 dlci 204(0xCC,0x30C0), dynamic,
broadcast,, status defined, active
R2#
R2#
R2#show frame-relay pvc

PVC Statistics for interface Serial1/0 (Frame Relay DTE)

Active Inactive Deleted Static
Local 3 0 0 0
Switched 0 0 0 0
Unused 0 0 0 0

DLCI = 201, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0

input pkts 109 output pkts 105 in bytes 7184
out bytes 6854 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 88 out bcast bytes 5632
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 01:19:57, last time pvc status changed 01:18:17

DLCI = 203, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0

input pkts 109 output pkts 106 in bytes 6890
out bytes 6789 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 90 out bcast bytes 5640
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 01:18:19, last time pvc status changed 01:18:19

DLCI = 204, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0

input pkts 123 output pkts 119 in bytes 8378
out bytes 8232 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 90 out bcast bytes 5640
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 01:18:19, last time pvc status changed 01:18:19
R2#

R2#show frame-relay lmi

LMI Statistics for interface Serial1/0 (Frame Relay DTE) LMI TYPE = ANSI
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Sent 481 Num Status msgs Rcvd 478
Num Update Status Rcvd 0 Num Status Timeouts 3
Last Full Status Req 00:00:32 Last Full Status Rcvd 00:00:32
R2#
R2#


R2#sh ip eigrp neighbors
IP-EIGRP neighbors for process 100
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
2 10.1.1.1 Se1/0 170 01:17:59 984 5000 0 18
1 10.1.1.4 Se1/0 168 01:17:59 425 2550 0 15
0 10.1.1.3 Se1/0 140 01:17:59 451 2706 0 15
R2#
R2#
R2#sh ip eigrp topology
IP-EIGRP Topology Table for AS(100)/ID(1.1.1.2)

Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - reply Status, s - sia Status

P 1.1.1.1/32, 1 successors, FD is 2297856
via 10.1.1.1 (2297856/128256), Serial1/0
P 1.1.1.3/32, 1 successors, FD is 2297856
via 10.1.1.3 (2297856/128256), Serial1/0
P 1.1.1.2/32, 1 successors, FD is 128256
via Connected, Loopback0
P 1.1.1.4/32, 1 successors, FD is 2297856
via 10.1.1.4 (2297856/128256), Serial1/0
P 10.1.1.0/24, 1 successors, FD is 2169856
via Connected, Serial1/0
R2#

R2#sh ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

1.0.0.0/32 is subnetted, 4 subnets
D 1.1.1.1 [90/2297856] via 10.1.1.1, 01:18:29, Serial1/0
D 1.1.1.3 [90/2297856] via 10.1.1.3, 01:18:30, Serial1/0
C 1.1.1.2 is directly connected, Loopback0
D 1.1.1.4 [90/2297856] via 10.1.1.4, 01:11:49, Serial1/0
10.0.0.0/24 is subnetted, 1 subnets
C 10.1.1.0 is directly connected, Serial1/0
R2#
R2#

=================================================


=================================================
R3#
R3#
R3#ping 1.1.1.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 24/52/140 ms
R3#ping 1.1.1.2

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 20/66/124 ms
R3#ping 1.1.1.4

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.4, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 16/62/100 ms
R3#
R3#
R3#show frame-relay map
Serial1/0 (up): ip 10.1.1.1 dlci 301(0x12D,0x48D0), static,
broadcast,
CISCO, status defined, active
Serial1/0 (up): ip 10.1.1.2 dlci 302(0x12E,0x48E0), dynamic,
broadcast,, status defined, active
Serial1/0 (up): ip 10.1.1.4 dlci 304(0x130,0x4C00), dynamic,
broadcast,, status defined, active
R3#
R3#
R3#show frame-relay pvc

PVC Statistics for interface Serial1/0 (Frame Relay DTE)

Active Inactive Deleted Static
Local 3 0 0 0
Switched 0 0 0 0
Unused 0 0 0 0

DLCI = 301, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0

input pkts 137 output pkts 132 in bytes 9213
out bytes 8904 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 109 out bcast bytes 6976
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 01:39:44, last time pvc status changed 01:38:05

DLCI = 302, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0

input pkts 136 output pkts 133 in bytes 8789
out bytes 8686 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 112 out bcast bytes 7018
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 01:38:06, last time pvc status changed 01:38:06

DLCI = 304, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0

input pkts 159 output pkts 154 in bytes 11292
out bytes 11177 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 111 out bcast bytes 6984
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 01:38:06, last time pvc status changed 01:38:06
R3#


R3#
R3#show frame-relay lmi

LMI Statistics for interface Serial1/0 (Frame Relay DTE) LMI TYPE = ANSI
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Sent 601 Num Status msgs Rcvd 598
Num Update Status Rcvd 0 Num Status Timeouts 3
Last Full Status Req 00:00:33 Last Full Status Rcvd 00:00:33
R3#
R3#
R3#
R3#show ip eigrp neighbors
IP-EIGRP neighbors for process 100
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
2 10.1.1.1 Se1/0 125 01:37:57 852 5000 0 18
1 10.1.1.2 Se1/0 145 01:37:57 901 5000 0 15
0 10.1.1.4 Se1/0 132 01:37:57 969 5000 0 15
R3#
R3#

R3#
R3#show ip eigrp topology
IP-EIGRP Topology Table for AS(100)/ID(1.1.1.3)

Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - reply Status, s - sia Status

P 1.1.1.1/32, 1 successors, FD is 2297856
via 10.1.1.1 (2297856/128256), Serial1/0
P 1.1.1.3/32, 1 successors, FD is 128256
via Connected, Loopback0
P 1.1.1.2/32, 1 successors, FD is 2297856
via 10.1.1.2 (2297856/128256), Serial1/0
P 1.1.1.4/32, 1 successors, FD is 2297856
via 10.1.1.4 (2297856/128256), Serial1/0
P 10.1.1.0/24, 1 successors, FD is 2169856
via Connected, Serial1/0
R3#
R3#
R3#
R3#show ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

1.0.0.0/32 is subnetted, 4 subnets
D 1.1.1.1 [90/2297856] via 10.1.1.1, 01:38:18, Serial1/0
C 1.1.1.3 is directly connected, Loopback0
D 1.1.1.2 [90/2297856] via 10.1.1.2, 01:38:17, Serial1/0
D 1.1.1.4 [90/2297856] via 10.1.1.4, 01:31:36, Serial1/0
10.0.0.0/24 is subnetted, 1 subnets
C 10.1.1.0 is directly connected, Serial1/0
R3#
=================================================


=================================================

R4#ping 1.1.1.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 24/78/164 ms
R4#ping 1.1.1.2

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 24/61/120 ms
R4#ping 1.1.1.3

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 48/58/68 ms
R4#

R4#show frame-relay map
Serial1/0 (up): ip 10.1.1.1 dlci 401(0x191,0x6410), static,
broadcast,
CISCO, status defined, active
Serial1/0 (up): ip 10.1.1.2 dlci 402(0x192,0x6420), dynamic,
broadcast,, status defined, active
Serial1/0 (up): ip 10.1.1.3 dlci 403(0x193,0x6430), dynamic,
broadcast,, status defined, active
R4#
R4#show frame-relay pvc

PVC Statistics for interface Serial1/0 (Frame Relay DTE)

Active Inactive Deleted Static
Local 3 0 0 0
Switched 0 0 0 0
Unused 0 0 0 0

DLCI = 401, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0

input pkts 155 output pkts 153 in bytes 10850
out bytes 10408 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 118 out bcast bytes 7552
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 01:47:23, last time pvc status changed 01:45:44

DLCI = 402, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0

input pkts 164 output pkts 161 in bytes 11362
out bytes 11270 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 121 out bcast bytes 7594
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 01:45:45, last time pvc status changed 01:45:45

DLCI = 403, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0

input pkts 179 output pkts 176 in bytes 13016
out bytes 12859 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 121 out bcast bytes 7594
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 01:45:48, last time pvc status changed 01:45:48
R4#

R4#show frame-relay lmi

LMI Statistics for interface Serial1/0 (Frame Relay DTE) LMI TYPE = ANSI
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Sent 647 Num Status msgs Rcvd 644
Num Update Status Rcvd 0 Num Status Timeouts 3
Last Full Status Req 00:00:10 Last Full Status Rcvd 00:00:10
R4#
R4#
R4#

R4#show ip eigrp neighbors
IP-EIGRP neighbors for process 100
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
2 10.1.1.1 Se1/0 162 01:45:37 1015 5000 0 18
1 10.1.1.2 Se1/0 134 01:45:37 615 3690 0 15
0 10.1.1.3 Se1/0 153 01:45:37 314 1884 0 16
R4#
R4#
R4#show ip eigrp topology
IP-EIGRP Topology Table for AS(100)/ID(10.1.1.4)

Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - reply Status, s - sia Status

P 1.1.1.1/32, 1 successors, FD is 2297856
via 10.1.1.1 (2297856/128256), Serial1/0
P 1.1.1.3/32, 1 successors, FD is 2297856
via 10.1.1.3 (2297856/128256), Serial1/0
P 1.1.1.2/32, 1 successors, FD is 2297856
via 10.1.1.2 (2297856/128256), Serial1/0
P 1.1.1.4/32, 1 successors, FD is 128256
via Connected, Loopback0
P 10.1.1.0/24, 1 successors, FD is 2169856
via Connected, Serial1/0
R4#
R4#
R4#show ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

1.0.0.0/32 is subnetted, 4 subnets
D 1.1.1.1 [90/2297856] via 10.1.1.1, 00:05:08, Serial1/0
D 1.1.1.3 [90/2297856] via 10.1.1.3, 01:45:56, Serial1/0
D 1.1.1.2 [90/2297856] via 10.1.1.2, 00:05:08, Serial1/0
C 1.1.1.4 is directly connected, Loopback0
10.0.0.0/24 is subnetted, 1 subnets
C 10.1.1.0 is directly connected, Serial1/0
R4#
R4#

=================================================


Attachments:
EIGRP_FR_Switch_DLCI_Mapping.png
EIGRP_FR_Switch_DLCI_Mapping.png [ 4.05 KiB | Viewed 7910 times ]
EIGRP_FR_Point-to-MultiPoint_Physical_int.png
EIGRP_FR_Point-to-MultiPoint_Physical_int.png [ 32.85 KiB | Viewed 7910 times ]
topology.net [2.9 KiB]
Downloaded 384 times

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/