|how to set up an IP address on the AP?
|Page 1 of 1|
|Author:||candy [ Fri Jul 11, 2014 10:48 am ]|
|Post subject:||how to set up an IP address on the AP?|
I have an Aironet 1231 AP, i don't know how to set up an IP address on the AP? somebody, help me, please, tnx.
|Author:||zhidaahua [ Fri Jul 11, 2014 11:01 am ]|
|Post subject:||Re: how to set up an IP address on the AP?|
You can get the answer from the http://www.cisco.com. Below is just a reference:
By default, the AP requests an IP address through DHCP.
Cisco IOS Releases 12.3(2)JA and later change the default behavior of APs requesting an IP address from a DHCP server:
l When you connect a 1200 or 1230 series AP with a default configuration to your LAN, the AP requests an IP address from your DHCP server. If it does not receive an address, it continues to send requests indefinitely.
l When you connect an 1100 series AP with a default configuration to your LAN, the 1100 series AP makes several attempts to get an IP address from the DHCP server. If it does not receive an address, it assigns itself the IP address 10.0.0.1 for five minutes. During this five minute window, you can browse to the default IP address and configure a static address. If after five minutes the AP is not reconfigured, it discards the 10.0.0.1 address and reverts to requesting an address from the DHCP server. If it does not receive an address, it sends requests indefinitely. If you miss the five minute window for browsing to the AP at 10.0.0.1, you can power-cycle the AP to repeat the process.
You can also manually set the IP address of the AP. On a Microsoft Windows PC that is connected to the Ethernet segment, from the DOS prompt, issue this command:
arp -s a.b.c.d 00-12-34-56-78-90
Note: The term a.b.c.d represents the IP address that is to be set on the AP, and 00-12-34-56-78-90 is the MAC address. This address appears on the panel on the bottom of the AP.
Issue this command in order to verify the address:
Note: This procedure does not work if the AP has already been assigned an IP address by another method.
|Page 1 of 1||All times are UTC|
|Powered by phpBB® Forum Software © phpBB Group