It is currently Sun Dec 15, 2019 9:13 am

View unanswered posts | View active topics


Board index » GNS3 » Development

All times are UTC




Post new topic Reply to topic  Page 1 of 2
  [ 16 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
flaviojs
 Post subject: Dynamips-0.2.8-community
PostPosted: Thu Jul 04, 2013 5:36 am 
Offline

Joined: Wed May 22, 2013 7:48 am
Posts: 93
Location: Portugal
Bye bye release candidates.
Download files from here:
Report issues here:
Code:
Release Notes for Cisco router simulator (Dynamips-community)
=============================================================

Version:  v0.2.8-community

Release date:  Thursday, July 4, 2013 (2013-07-04)

Source code:  https://github.com/GNS3/dynamips-community/tree/v0.2.8-community

License: GNU GPLv2



What's New since v0.2.8-RC7-community
=====================================

* Fixed crashes in x86_64 builds by decreasing the optimization level to O2.
  It was also reported that using O2 makes packet delivery in general, and frame relay especially more reliable.
* Fixed many memory leaks.
* Updated documentation.



Known Issues
============

There is lots of missing hardware functionality.
  - https://github.com/GNS3/dynamips-community/issues/5

Reload from the router console doesn't work.
  - https://github.com/GNS3/dynamips-community/issues/6

Using a self decompressing image can lead to an invalid IA and stop the cpu.
  - https://github.com/GNS3/dynamips-community/issues/8

There are still memory leaks.



_________________
Dynamips maintainer and sporadic developer
https://github.com/GNS3/dynamips


Last edited by flaviojs on Thu Jul 25, 2013 4:27 pm, edited 1 time in total.

Top
 Profile  
 
grossmj
 Post subject: Re: Dynamips-0.2.8-community
PostPosted: Thu Jul 04, 2013 11:31 pm 
Offline
Site Admin

Joined: Sat Oct 11, 2008 1:41 pm
Posts: 2668
Location: Canada
Good job. Daniel can you create Debian packages for Dynamips and GNS3 packages when it is released?

Thanks!

_________________
Jeremy, GNS3 Programmer & Benevolent Dictator for Life.
Top
 Profile  
 
claydon_dan
 Post subject: Re: Dynamips-0.2.8-community
PostPosted: Fri Jul 05, 2013 8:27 am 
Offline

Joined: Sun Sep 16, 2012 9:55 pm
Posts: 541
Location: England
Yes, not a problem I shall get both both packaged. I am also still planning on creating a VPCS package, which will help provide a complete range of packages for users to install, bringing the Debian based line, much closer to the currrent Wndows installer.

One suggestion - the github repo for dynamips is named as dynamips-community which is what I have used to create the DEB package in the form dynamips-community-version, I have noticed the latest releases are now dynamips-version-community.

Personally I would use the former as it keeps the project name and version seperate, but i'm open to suggestions on this one (I believe the former may also be the proper approach for the packaging).

Obviously it would be better to decide on a naming convention, that we can then all stick to.

_________________
Daniel
Forum Moderator & Debian Package Maintainer for GNS3, Dynamips & VPCS.
Standalone DEB Packages are available from http://gns3.serverb.co.uk - To be updated!
Top
 Profile  
 
flaviojs
 Post subject: Re: Dynamips-0.2.8-community
PostPosted: Fri Jul 05, 2013 12:24 pm 
Offline

Joined: Wed May 22, 2013 7:48 am
Posts: 93
Location: Portugal
Well, all the previous versions used "dynamips-<version>-community", even if it didn't show up in the command line.
I just kept the same scheme and made it appear in the command line.

I considered changing it to "dynamips-community-<version>" but didn't make any decision, mainly because I don't know the details of what happened to the original dynamips.
I only know that the original author isn't working on it.
My main doubt is, what would happen if/when the original author comes back and continues development?
Top
 Profile  
 
grossmj
 Post subject: Re: Dynamips-0.2.8-community
PostPosted: Fri Jul 05, 2013 4:52 pm 
Offline
Site Admin

Joined: Sat Oct 11, 2008 1:41 pm
Posts: 2668
Location: Canada
Hi,

I was thinking why not simply forget the "community" in future releases?

Quote:
My main doubt is, what would happen if/when the original author comes back and continues development?


Also, I met the guy a couple of times and I am pretty sure 99% that the original author won't come back.

Finally, you will have time to work on the next Dynamips version because the next GNS3 release won't be out before September at the earliest.

_________________
Jeremy, GNS3 Programmer & Benevolent Dictator for Life.
Top
 Profile  
 
flaviojs
 Post subject: Re: Dynamips-0.2.8-community
PostPosted: Fri Jul 05, 2013 8:55 pm 
Offline

Joined: Wed May 22, 2013 7:48 am
Posts: 93
Location: Portugal
grossmj wrote:
Also, I met the guy a couple of times and I am pretty sure 99% that the original author won't come back.

I see, then I'm fine with dropping "community" and start using the original name, dynamips.
But we should only do that when it's time to make the next release.

Also, I don't have access to cisco routers anymore so unless someone contributes info on real routers to use as reference, like the output of "show tech-support", it's very unlikely that i'll touch any of the hardware stuff.
But at least I'll hunt for memory leaks and try to fix any crash that is reported. =)
Top
 Profile  
 
LittleTiger
 Post subject: Re: Dynamips-0.2.8-community
PostPosted: Wed Jul 10, 2013 7:57 pm 
Offline

Joined: Mon Dec 10, 2012 6:01 pm
Posts: 4
Looks that IDLE PC not working with stable release. CPU usage is always 100%.
I'm using Ubuntu 12.04 and I installed Dynamips from source codes.

Any idea how to debugging why IDLE PC not working?
Top
 Profile  
 
flaviojs
 Post subject: Re: Dynamips-0.2.8-community
PostPosted: Thu Jul 11, 2013 8:52 pm 
Offline

Joined: Wed May 22, 2013 7:48 am
Posts: 93
Location: Portugal
Quote:
Looks that IDLE PC not working with stable release. CPU usage is always 100%.
I'm using Ubuntu 12.04 and I installed Dynamips from source codes.

Any idea how to debugging why IDLE PC not working?

If you mean this error then it's not dynamips, but a GNS3 issue with detecting versions (doesn't know that the final version is newer than any version with RC).

Otherwise, tell me how to reproduce your problem with a step-by-step guide.
It should be explicit enough so that someone unfamiliar with GNS3/dynamips can reproduce the problem.
Top
 Profile  
 
grossmj
 Post subject: Re: Dynamips-0.2.8-community
PostPosted: Fri Jul 19, 2013 2:16 pm 
Offline
Site Admin

Joined: Sat Oct 11, 2008 1:41 pm
Posts: 2668
Location: Canada
Quote:
I see, then I'm fine with dropping "community" and start using the original name, dynamips.
But we should only do that when it's time to make the next release.


I agree, we should do it when we release the next major version.

_________________
Jeremy, GNS3 Programmer & Benevolent Dictator for Life.
Top
 Profile  
 
flaviojs
 Post subject: Re: Dynamips-0.2.8-community
PostPosted: Tue Jul 23, 2013 6:56 am 
Offline

Joined: Wed May 22, 2013 7:48 am
Posts: 93
Location: Portugal
grossmj wrote:
I agree, we should do it when we release the next major version.

Or the next bugfix version, or the next RC version, any GNS3 release is fine (as long as the dynamips code changed). =P



_________________
Dynamips maintainer and sporadic developer
https://github.com/GNS3/dynamips
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 16 posts ]  Go to page 1, 2  Next

Board index » GNS3 » Development

All times are UTC


Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group

phpBB SEO