GNS3
http://forum.gns3.net/

Which IOS image is correct for a 2621XM router?
http://forum.gns3.net/topic2951.html
Page 1 of 1

Author:  ande0255 [ Tue Dec 28, 2010 2:24 am ]
Post subject:  Which IOS image is correct for a 2621XM router?

I am trying to add an IOS image for a Cisco 2621XM router to follow along with the CBT Nuggets route videos, but I don't have the exact image the person in the video is using.

He uses something along the lines of C2600-adventerprisek9-mz 124-125.bin

The closest I have is C2600-adventerprisek9-mz 124-19.bin

I have a probably 40-60 images under the C2600 category, but for some reason none of them that I have tried are allowing me to enable frame-relay - They won't even recognize the command "int serial 0/0.1 multipoint" from global configuration mode, noting that it is not recognizing the 'multipoint' syntax.

Once I get into the sub-interface, there are no commands that even begin with "frame-relay"

Anyone know of the correct IOS for a 2621XM, or a different model I can use as a layer 2 / layer 3 Router?

Author:  tranzitwww [ Tue Dec 28, 2010 6:32 am ]
Post subject:  Re: Which IOS image is correct for a 2621XM router?

That's because you forgot about command:
Code:
R1(config-if)#encapsulation frame-relay

Author:  mongoakira [ Tue Aug 23, 2011 1:12 am ]
Post subject:  Re: Which IOS image is correct for a 2621XM router?

Hello ande0255,

I am also watching the CBT Nuggets for CCNP Route, in my case I am using Cisco router 2691 with this IOS image:

c2691-advipservicesk9-mz.124-15.T6.bin.

and I had the same problem as you. Well, after check/read blogs, Cisco web sites.... etc.... I never found the answer, until today, you want to cry after this, because it's pretty simple is JUST one command. These are the steps I did:

1- Router(config)#frame-relay switching ==> After this command it started work.
2- Router(config)#interface serial 0/1.100 multipoint.

I hope this can help you if you have not received the answer of your inquiry, if not, keep the command in min for future Frame Relay labs.

Regards,

Author:  ofelena [ Tue Nov 22, 2011 10:09 am ]
Post subject:  Re: Which IOS image is correct for a 2621XM router?

How to make Windows XP look like Windows Vista or Windows 7 without download those Operating systems? So I have an old computer that definitely can not run Windows 7 or Vista. So I was wondering if there is any way (any good software that does not include spywares/trojans) that can make my Windows XP system looks like Windows vista or windows 7?
________________________
market samurai ~ marketsamurai ~ marketsamurai.com

Author:  hamid [ Tue Dec 06, 2011 6:48 am ]
Post subject:  Re: Which IOS image is correct for a 2621XM router?

To-> ande0255. You can check out many ios images on dis web page:
http://www.mmnt.ru/int/get?st=c2600&cn=&in=f

Author:  DirkGently [ Tue Oct 21, 2014 4:25 pm ]
Post subject:  Re: Which IOS image is correct for a 2621XM router?

I don't know if this is allowed. If not, please delete this post mods.


That said, Sobek.su has pretty much every IOS available.

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/