|Problem with Dynamic nat in gns3
|Page 1 of 1|
|Author:||HugoAmaro [ Mon Jul 01, 2013 10:55 am ]|
|Post subject:||Problem with Dynamic nat in gns3|
I seem to have a problem with my dynamic nat in gns3!
Here's the thing, i have a cisco 3725 router running a dynamic nat, when i configure it, it works as expected, but when i close the project and open it on the next day, the dynamic nat becomes a bit buggy.
I have the said router connected to my real internet connection, and i have another router connected to another cloud that is connected to my real internet connection.
When the problem appears, i can ping between routers, wich proves nat is working, but i cant ping neither the default gateway to the internet, nor anysite on the internet, unless i cahnge the pool addresses, and it as to be IPs that i never used in the pool, or it doenst work.
Any thoughts on what is happening? I'm running out of IPs to put int the nat pool.
Here is the configuration of the nat pool
ip nat pool PUBLIC_NAT_IPS 192.168.1.241 192.168.1.245 netmask 255.255.255.0
ip nat inside source list NAT_ADDRESSES pool PUBLIC_NAT_IPS overload
ip nat inside source static 10.1.68.50 192.168.1.236
ip access-list extended NAT_ADDRESSES
deny ip 10.1.64.0 0.0.7.255 10.1.0.0 0.0.63.255
deny ip 10.1.254.0 0.0.0.3 10.1.0.0 0.0.63.255
permit ip 10.1.64.0 0.0.7.255 any
permit ip 10.1.254.0 0.0.0.3 any
Hope i could explain my problem well, and thank you in advance
|Page 1 of 1||All times are UTC|
|Powered by phpBB® Forum Software © phpBB Group