GNS3
http://forum.gns3.net/

After reboot junos on GNS3
http://forum.gns3.net/topic8760.html
Page 1 of 1

Author:  Cass Wang [ Mon Mar 17, 2014 8:56 am ]
Post subject:  After reboot junos on GNS3

Hi all,

I used GNS3 emulate junos. all configuration and performance etc. are ok. But after I reboot routers, interfaces on junos becomes administrative down. I tried again and again, it still doesn't work well...

Anyone has any ideas? Thanks very much.

BR//Cass

See quote below:

Quote:
root> show version
Model: olive
JUNOS Base OS boot [10.1R1.8]
JUNOS Base OS Software Suite [10.1R1.8]
JUNOS Kernel Software Suite [10.1R1.8]
JUNOS Crypto Software Suite [10.1R1.8]
JUNOS Packet Forwarding Engine Support (M/T Common) [10.1R1.8]
JUNOS Packet Forwarding Engine Support (M20/M40) [10.1R1.8]
JUNOS Online Documentation [10.1R1.8]
JUNOS Voice Services Container package [10.1R1.8]
JUNOS Border Gateway Function package [10.1R1.8]
JUNOS Services AACL Container package [10.1R1.8]
JUNOS Services LL-PDF Container package [10.1R1.8]
JUNOS Services Stateful Firewall [10.1R1.8]
JUNOS AppId Services [10.1R1.8]
JUNOS IDP Services [10.1R1.8]
JUNOS Routing Software Suite [10.1R1.8]


Quote:
root> show interfaces em0 detail
Physical interface: em0, Administratively down, Physical link is Up
Interface index: 8, SNMP ifIndex: 17, Generation: 134
Type: Ethernet, Link-level type: Ethernet, MTU: 1514, Clocking: Unspecified,
Speed: Unspecified
Device flags : Present Running
Interface flags: Down
Link type : Unspecified
Link flags : None
Physical info : Unspecified
Hold-times : Up 0 ms, Down 0 ms
Current address: 00:ab:ae:99:e3:00, Hardware address: 00:ab:ae:99:e3:00
Alternate link address: Unspecified
Last flapped : Never
Statistics last cleared: Never


Quote:
interfaces {
em0 {
vlan-tagging;
unit 0 {
description juniper1->juniper2;
vlan-id 0;
family inet {
address 10.0.12.1/30;
}
}

Author:  Ph4ntom74 [ Mon Mar 24, 2014 6:31 pm ]
Post subject:  Re: After reboot junos on GNS3

try this: http://ethernuno.wordpress.com/2014/03/21/how-to-install-run-olive12-1r1-9-on-gns3/

Cass Wang wrote:
Hi all,

I used GNS3 emulate junos. all configuration and performance etc. are ok. But after I reboot routers, interfaces on junos becomes administrative down. I tried again and again, it still doesn't work well...

Anyone has any ideas? Thanks very much.

BR//Cass

See quote below:

Quote:
root> show version
Model: olive
JUNOS Base OS boot [10.1R1.8]
JUNOS Base OS Software Suite [10.1R1.8]
JUNOS Kernel Software Suite [10.1R1.8]
JUNOS Crypto Software Suite [10.1R1.8]
JUNOS Packet Forwarding Engine Support (M/T Common) [10.1R1.8]
JUNOS Packet Forwarding Engine Support (M20/M40) [10.1R1.8]
JUNOS Online Documentation [10.1R1.8]
JUNOS Voice Services Container package [10.1R1.8]
JUNOS Border Gateway Function package [10.1R1.8]
JUNOS Services AACL Container package [10.1R1.8]
JUNOS Services LL-PDF Container package [10.1R1.8]
JUNOS Services Stateful Firewall [10.1R1.8]
JUNOS AppId Services [10.1R1.8]
JUNOS IDP Services [10.1R1.8]
JUNOS Routing Software Suite [10.1R1.8]


Quote:
root> show interfaces em0 detail
Physical interface: em0, Administratively down, Physical link is Up
Interface index: 8, SNMP ifIndex: 17, Generation: 134
Type: Ethernet, Link-level type: Ethernet, MTU: 1514, Clocking: Unspecified,
Speed: Unspecified
Device flags : Present Running
Interface flags: Down
Link type : Unspecified
Link flags : None
Physical info : Unspecified
Hold-times : Up 0 ms, Down 0 ms
Current address: 00:ab:ae:99:e3:00, Hardware address: 00:ab:ae:99:e3:00
Alternate link address: Unspecified
Last flapped : Never
Statistics last cleared: Never


Quote:
interfaces {
em0 {
vlan-tagging;
unit 0 {
description juniper1->juniper2;
vlan-id 0;
family inet {
address 10.0.12.1/30;
}
}

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/