It is currently Mon Sep 28, 2020 5:58 pm


All times are UTC




Post new topic Reply to topic  [ 14 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: the target machine actively refused it after upgrade
PostPosted: Sat May 31, 2014 9:15 am 
Offline

Joined: Wed May 21, 2014 5:37 am
Posts: 40
Hello,

Made upgrade pip3 install gns3-server==1.0a6, from 1.0a5
Change network card to host only adapter
Got proper ip 192.168.56.101

I can ping it from my Windows 8.1 64 bit

when I try to add IOU device get an error message:
[Errno: 10061] No connection could be made because the target machine actively refused it.
I switched off firewall, antivirus


I cannot display:
http://192.168.56.101:8000/upload

Thank you and regards
Robert




Top
 Profile  
 
 Post subject: Re: the target machine actively refused it after upgrade
PostPosted: Sat May 31, 2014 8:50 pm 
Offline
Site Admin

Joined: Sat Oct 11, 2008 1:41 pm
Posts: 2668
Location: Canada
Hi,

Make sure you reboot the VM after the update.

Also use the following command to make sure the last version is installed:

Code:
pip3 freeze


Cheers,

_________________
Jeremy, GNS3 Programmer & Benevolent Dictator for Life.


Top
 Profile  
 
 Post subject: Re: the target machine actively refused it after upgrade
PostPosted: Sun Jun 01, 2014 5:35 am 
Offline

Joined: Wed May 21, 2014 5:37 am
Posts: 40
Thank you,

restart many time, the same error message
I've attached result from pip freeze

I don’t have to make upgrade. I import new appliance and it works. The issue is I don’t know how to use my old topology configuration. I put several IOU switches and configured them, vlan, rspt etc.
Do I have start from the scratch or can use my old IOU switch configuration?
Cheers,
Robert


Attachments:
pip3 freeze.PNG
pip3 freeze.PNG [ 2.86 KiB | Viewed 9278 times ]
Top
 Profile  
 
 Post subject: Re: the target machine actively refused it after upgrade
PostPosted: Mon Jun 02, 2014 9:35 am 
Offline

Joined: Sat May 31, 2014 6:04 pm
Posts: 12
I can confirm that I have the same problem. And I can't access the GUI after the upgrade and any connection going to the VM IP on tcp/8000 drops.

Thanks and regards


Top
 Profile  
 
 Post subject: Re: the target machine actively refused it after upgrade
PostPosted: Mon Jun 02, 2014 7:58 pm 
Offline
Site Admin

Joined: Sat Oct 11, 2008 1:41 pm
Posts: 2668
Location: Canada
Ok, try to manually start the server to see what could be wrong. The best would be to log on the VM using user: gns3 and password: cisco and manually start the server to see what could be wrong.

Code:
$ gns3server
GNS3 server version 1.0a6
Copyright (c) 2007-2014 GNS3 Technologies Inc.
Running with Python 3.4.0 and has PID 4262
[I 140602 13:53:30 main:74] current locale is en_CA.UTF-8
[W 140602 13:53:30 config:82] no configuration file could be found or read
[I 140602 13:53:30 base:126] dynamips module running with PID 4264
[I 140602 13:53:30 base:79] ZeroMQ client (dynamips) connecting to 127.0.0.1:34504
[W 140602 13:53:30 __init__:76] VPCS binary couldn't be found!
[I 140602 13:53:30 base:126] vpcs module running with PID 4267
[I 140602 13:53:30 base:79] ZeroMQ client (vpcs) connecting to 127.0.0.1:34504
[I 140602 13:53:30 server:219] ZeroMQ server listening to 127.0.0.1:34504
[I 140602 13:53:30 base:126] iou module running with PID 4268
[I 140602 13:53:30 base:79] ZeroMQ client (iou) connecting to 127.0.0.1:34504
Starting server on 0.0.0.0:8000 (Tornado v3.2, PyZMQ v14.0.1, ZMQ v4.0.4)

_________________
Jeremy, GNS3 Programmer & Benevolent Dictator for Life.


Top
 Profile  
 
 Post subject: Re: the target machine actively refused it after upgrade
PostPosted: Tue Jun 03, 2014 3:12 am 
Offline

Joined: Sat May 03, 2014 2:13 pm
Posts: 4
I'm experiencing the same problem eventhough I got the 1.0a6 version and I verified this by using the pip3 freeze command.
I can ping the IP given from ifconfig but I cannot access it. In my case it is 192.168.194.132
I use http://192.168.194.132:8000/upload but I can't access it the server to upload the IOU image.
Tried to restart my VM, GNS3 and same problem.. Any help?


Top
 Profile  
 
 Post subject: Re: the target machine actively refused it after upgrade
PostPosted: Tue Jun 03, 2014 4:39 am 
Offline

Joined: Wed May 21, 2014 5:37 am
Posts: 40
I input gns3server on problematic vm - nothing happened.
On second, working vm, I got similar info to what you post.
Cheers
Robert


Top
 Profile  
 
 Post subject: Re: the target machine actively refused it after upgrade
PostPosted: Tue Jun 03, 2014 10:39 am 
Offline

Joined: Sat May 31, 2014 6:04 pm
Posts: 12
I have it working now.

For some weird reason after the update, the IP on eth0 had gone.

I put in the IP again (192.168.1.171) and it is back to working like it should.

You guys can probably put in the IP statically and see if it works for you or not.

Code:
ifconfig eth0 192.168.1.171 netmask 255.255.255.0 up


The attachment is gns3server command.

Thanks.


Attachments:
Capture.PNG
Capture.PNG [ 28.39 KiB | Viewed 9197 times ]
Top
 Profile  
 
 Post subject: Re: the target machine actively refused it after upgrade
PostPosted: Tue Jun 03, 2014 3:32 pm 
Offline

Joined: Wed May 21, 2014 5:37 am
Posts: 40
the issue is that we can still ping our ip address and I see it, ifconfig
Cheers
Robert


Top
 Profile  
 
 Post subject: Re: the target machine actively refused it after upgrade
PostPosted: Wed Jun 04, 2014 10:27 am 
Offline

Joined: Sat May 31, 2014 6:04 pm
Posts: 12
I didn't have the IP so I put it in and luckily for me it worked.

Try putting in the IP again and see if it works.




Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ]  Go to page 1, 2  Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group

phpBB SEO