GNS3
http://forum.gns3.net/

NM-16ESW : Not enough space on flash to store VLAN database
http://forum.gns3.net/topic592.html
Page 1 of 1

Author:  Zindecorner [ Wed Feb 25, 2009 5:44 pm ]
Post subject:  NM-16ESW : Not enough space on flash to store VLAN database

SW1(vlan)#vlan 30
VLAN 30 added:
Name: VLAN0030
SW1(vlan)#exit
% not enough space on flash to store vlan database. trying squeeze...First create squeeze log by erasing the entire device

% error squeezing flash - (Missing or corrupted log)
Error on database apply 40: NV storage failure
Use 'abort' command to exit
SW1(vlan)#


Impossible de sauver le VLAN database.... Que doit-on faire ?

Author:  cscrtr [ Wed Mar 04, 2009 12:21 pm ]
Post subject:  Re: NM-16ESW : Not enough space on flash to store VLAN database

use following command:

#erase flash:

Erasing the flash filesystem will remove all files! Continue? [confirm]......<------ press enter

That's it...

csc

Author:  Aaron Dhiman [ Sun Jul 11, 2010 3:57 am ]
Post subject:  Re: NM-16ESW : Not enough space on flash to store VLAN database

Just encountered the same problem. I was able to get the vlan.dat back after creating a new vlan...and all previous vlans were in there still! :)

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/