It is currently Fri Nov 16, 2018 9:48 am


All times are UTC




Post new topic Reply to topic  [ 11 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Problem with Saving ASA configuration GNS3 0.7
PostPosted: Thu Mar 04, 2010 12:06 pm 
Offline

Joined: Tue Dec 01, 2009 3:27 pm
Posts: 49
Hello Jeremy,

I cannot save ASA configuration GNS3 0.7 (image asa802-k8.bin), i found in a forum suggestions to try also this command and it was unsuccesfull again. There was no file in configs folder and when i was open the project nothing saved.

copy running-config flash:/.private/startup-config

I have test it in Win XP SP3 (3 PC) and Ubuntu 9.10 (1 PC)

Thank you very much.




Top
 Profile  
 
 Post subject: Re: Problem with Saving ASA configuration GNS3 0.7
PostPosted: Thu Mar 04, 2010 4:21 pm 
Hi maxim40,

try:
ciscoasa(config)# boot config disk0:/.private/startup-config
ciscoasa(config)# copy running-config disk0:/.private/startup-config
ciscoasa(config)# write


# show startup-config


For more information:
http://blog.gns3.net/2009/12/how-to-emulate-cisco-asa/


Top
  
 
 Post subject: Re: Problem with Saving ASA configuration GNS3 0.7
PostPosted: Fri Mar 05, 2010 11:02 am 
Offline

Joined: Tue Dec 01, 2009 3:27 pm
Posts: 49
I tried the following commands in ubuntu 9.10 and in Win XP SP3 and i get the following error. I execute show startup-config but nothing appeared.

Thank you

Output from WIN XP SP3

ciscoasa# conf t
ciscoasa(config)# hostname ASA
ASA(config)# boot config disk0:/.private/startup-config
WARNING: BOOT variable added, but unable to find disk0:/.private/startup-config
ASA(config)# copy running-config disk0:/.private/startup-config
Source filename [running-config]?
Destination filename [/.private/startup-config]?
Cryptochecksum: 9332142c e53472d4 662ed6dc d633218d
%Error copying system:/running-config (Not enough space on device)
ASA(config)# write
Building configuration...
Cryptochecksum: 9332142c e53472d4 662ed6dc d633218d
%Error copying system:/running-config (Not enough space on device)
Error executing command
[FAILED]


Top
 Profile  
 
 Post subject: Re: Problem with Saving ASA configuration GNS3 0.7
PostPosted: Fri Mar 05, 2010 12:42 pm 
Hello maxim40


the error %Error copying system:/running-config (Not enough space on device) says that your disk0 does not have enough space or your ASA does not have the disk0 at all.

What works for me:
1) Follow http://blog.gns3.net/2009/12/how-to-emulate-cisco-asa/
2) Use this script: http://sites.google.com/site/pedroflor/Home/first_start-v2.sh?attredirects=0&d=1 instead of the Jeremy


Do it and let me know.


Top
  
 
 Post subject: Re: Problem with Saving ASA configuration GNS3 0.7
PostPosted: Fri Mar 05, 2010 12:47 pm 
Offline
Site Admin

Joined: Sat Oct 11, 2008 1:41 pm
Posts: 2668
Location: Canada
I'll update the script soon on blog.gns3.net.

Thanks,

_________________
Jeremy, GNS3 Programmer & Benevolent Dictator for Life.


Top
 Profile  
 
 Post subject: Re: Problem with Saving ASA configuration GNS3 0.7
PostPosted: Fri Mar 05, 2010 9:28 pm 
Offline

Joined: Tue Dec 01, 2009 3:27 pm
Posts: 49
Hello pflor,

I download the file paste it to /home/dionysos/Desktop/GNS3-0.7-src/IOS/ASA8.0(2)/tmp/asa/scripts

rename to "first_start.sh" checked "allow executing file as program but still no success.

The only thing that works was to format disk0: STOP ASA then Start ASA and save successfully (i found it in this forum).

Thank you


Top
 Profile  
 
 Post subject: Re: Problem with Saving ASA configuration GNS3 0.7
PostPosted: Mon Sep 13, 2010 11:36 am 
I have this same problem of not being able to save the configuration. I tried what is given above however it is not working for me :-( I tried creating a separate FLASH disk and keeping it inside /tmp/ASA1 directory and still it did not work :-(


Top
  
 
 Post subject: Re: Problem with Saving ASA configuration GNS3 0.7
PostPosted: Tue Jun 25, 2013 4:25 pm 
Offline

Joined: Tue Jun 25, 2013 4:18 pm
Posts: 1
You can replace that ASA by other one and try to save again.
I hope this helpful :)


Top
 Profile  
 
 Post subject: Re: Problem with Saving ASA configuration GNS3 0.7
PostPosted: Fri Aug 16, 2013 7:26 pm 
Offline

Joined: Fri Aug 16, 2013 7:23 pm
Posts: 1
I ran over this problem 4 days ago, searched over the WEB as well, watched the good GNS by Keith Barker from CBT Nuggets and other videos... Found nothing helpful. Doing stuff myself in GNS and Qemu, wrecking, reinstalling and so on, only one adjustment made it work:

Edit --> Preferences --> Qemu --> ASA tab --> select the ASA image --> at "NIC Model" option, select pcnet... It did for me. Two days of extensive testing and no problem so far.


Top
 Profile  
 
 Post subject: Re: Problem with Saving ASA configuration GNS3 0.7
PostPosted: Wed Feb 19, 2014 2:17 pm 
Offline

Joined: Thu Mar 22, 2012 5:02 am
Posts: 11
maxim40 wrote:
I tried the following commands in ubuntu 9.10 and in Win XP SP3 and i get the following error. I execute show startup-config but nothing appeared.

Thank you

Output from WIN XP SP3

ciscoasa# conf t
ciscoasa(config)# hostname ASA
ASA(config)# boot config disk0:/.private/startup-config
WARNING: BOOT variable added, but unable to find disk0:/.private/startup-config
ASA(config)# copy running-config disk0:/.private/startup-config
Source filename [running-config]?
Destination filename [/.private/startup-config]?
Cryptochecksum: 9332142c e53472d4 662ed6dc d633218d
%Error copying system:/running-config (Not enough space on device)
ASA(config)# write
Building configuration...
Cryptochecksum: 9332142c e53472d4 662ed6dc d633218d
%Error copying system:/running-config (Not enough space on device)
Error executing command
[FAILED]

Hi Guys, I’m experiencing the same problem here. Is there any solution for this issue?
Here are the details.
PC DETAILS:
Quote:
Windows 7 Enterprise SP1 64bit
GNS3 v0.8.6 all-in-one

ASA DETAILS:
Quote:
13,279,888 asa802-k8.bin.unpacked.initrd
1,095,856 asa802-k8.bin.unpacked.vmlinuz

http://firewallengineer.wordpress.com/2 ... on-device/




Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ]  Go to page 1, 2  Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group

phpBB SEO